Toshiba e-Studio 281c

Error Code:

Code: CEE0
Description: Transfer belt position detection abnormality (normal speed): The home position of the transfer belt cannot be detected.
Remedy: Is there any stain or scratch on the reflection tape inside the transfer belt? ↓→ YES → Clean the transfer belt or replace it. Replace the cleaning pad if it is excessively stained. NO Are the transfer belt home position sensors-1 and -2 stained? → YES → Clean them. NO Are the transfer belt home position sensors-1 and -2 working properly? (Perform the input check:03-[FAX]ON/[9]/[H]) ↓→ NO → 1) Check if the connectors or joint connectors of the transfer belt home position sensors-1 and -2 are disconnected. 2) Check if the connector CN361 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the wires of harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the transfer belt home position sensor-1 and -2. 6) Replace the LGC board. YES 1) Check if the conductor pattern on the LGC board is short circuited or open circuited. 2) Replace the LGC board.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home