Sharp MXC300

Error Code:

Code: L4-06
Description: Transfer unit lift trouble
Causes: Transfer unit position sensor trouble. MFPC PWB trouble. Connection trouble of the connector and the harness. Transfer unit separation clutch operation trouble. Primary transfer belt unit is not installed.
Remedy: Use SIM6-3 to check the separating operation of the transfer unit. Install the primary transfer belt unit. Replace the transfer unit position sensor. Replace the MFPC PWB. Harness and connector connection trouble. Replace the transfer unit separation clutch.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home