Ricoh CL7300

Error Code:

Code: SC 381
Description: Color development motor error When the motor speed is within the target level, the motor sends a lock signal (High to Low at CN214-5) to the BCU. SC380 is detected under the following conditions: • The Lock signal stays High 2 seconds after the motor turns on. • The Lock signal stays Low 2 seconds after the motor turns off. • The Lock signal stays High for more than 2 seconds while the motor is on.
Causes: • Defective motor • Defective BCU
Remedy: 1. Turn the main switch off and on. 2. Replace the motor. 3. Replace the BCU.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home