PrintCopy.info service

Mimaki JV22-130

Error Codes List page 1

  • Code: 01
  • Display: ERROR01 MAIN ROM
  • Description: • The control ROM is in abnormal conditions.
  • Remedy: 1) Replace the main PCB with a new one.
  • Code: 02
  • Display: ERROR02 MAIN RAM
  • Description: • The control RAM is in abnormal conditions.
  • Remedy: 1) Replace the main PCB with a new one.
  • Code: 03
  • Display: ERROR03 POWER +5V POWER +35V
  • Description: • The +5V (+35V) voltage is in abnormal conditions.
  • Remedy: 1) Replace the power supply or the main PCB with a new one.
  • Code: 04
  • Display: ERROR04 FLASH ROM
  • Description: • The Flash memory is in abnormal conditions.
  • Remedy: 1) Replace the main PCB with a new one.
  • Code: 06
  • Display: ERROR06 D-RAM
  • Description: • An error has occurred in the D-RAM.
  • Remedy: 1) Replace the main PCB with a new one.
  • Code: 07
  • Display: ERROR07 TEMP n
  • Description: • Abnormal temperature is detected.
  • Remedy: 1) Has ink in the camper run out? 2) Check the FPC cable connection. 3) Replace the Slider PCB with a new one. 4) Replace the head with a new one. 5) Replace the main PCB with a new one.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us