PrintCopy.info service

Kyocera KM2050

Error Codes List page 1

  • Code: C0030
  • Description: Fax control PCBsystem problem
    • Processing with the fax software was disabled due to a hardware or software problem.
  • Causes: Defective fax control PCB.
  • Remedy: Replace the fax control PCB and check for correct operation.
  • Code: C0070
  • Description: Fax control PCB incompatibility detection problem
    • Fax software is not compatible with MMI software.
  • Causes: Fax software or main software is something of the other machine.
  • Remedy: Check the version of the Fax software and the main software, upgrade the version to the compatible software.
  • Code: C0100
  • Description: Backup memory read/write problem (main PCB flash)
    • Read and write data does not match.
  • Causes: Defectivemain PCB.
  • Remedy: Replace the main PCB and check for correct operation.
  • Code: C0110
  • Description: Backup memory data problem (main PCB flash)
    • Data in the specified area of the backup memory does not match the specified values.
  • Causes: Problem with the backup memory data. Defective backup RAM.
  • Remedy: Turn safety switch off and back on and run maintenance item U020 to set the contents of the backup memory data again. If the C0110 is displayed after re-setting the backup memory contents, replace the main PCB.
  • Code: C0130
  • Description: Backup memory read/write problem (main PCB EEPROM)
    • Read and write data does not match.
  • Causes: Defective EEPROM or main PCB.
  • Remedy: Replace the main PCB and check for correct operation.
  • Code: C0140
  • Description: Backup memory data problem (main PCB EEPROM)
    • Data in the specified area of the backup memory does not match the specified values.
  • Causes: Problem with the backup memory data. Defective EEPROM.
  • Remedy: Turn safety switch off and back on and run maintenance item U020 to set the contents of the backup memory data again. If the C0140 is displayed after re-setting the backup memory contents, replace the EEPROM or main PCB.
  • Code: C0150
  • Description: Backup memory read/write problem (engine PCB)
    • Read and write data does not match.
  • Causes: Defective engine PCB.
  • Remedy: Replace the engine PCB and check for correct operation.
  • Code: C0160
  • Description: Backup memory data problem (engine PCB)
    • Data in the specified area of the backup memory does not match the specified values.
  • Causes: Problem with the backup memory data. Defective backup RAM.
  • Remedy: Turn safety switch off and back on and run maintenance item U020 to set the contents of the backup memory data again. If the C0160 is displayed after re-setting the backup memory contents, replace the engine PCB.
Service manual
Error Code
Parts Catalog
Compatibility
Home
New Register Forgot Password?
Send message to us