Remedy: 1. If this is the first time the error has occurred, cancel and then restart the job. 2. If the error occurs repeatedly, reboot the engine and retry the job. 3. If error still persists, reset to factory settings. Upgrade to most current firmware.
Code: 44.10.XX
Description: Error Event log message (Multifunction product only.). A send to email error has occurred.
Remedy: Try to send the job again. Check the Digital Send configuration.
Code: 44.11.0E
Description: Error Event log message (Multifunction product only.). The attachment filename already exists at the destination, and the flag to fail on filename collisions was set. This file will not be sent.
Remedy: 1. If this is the first time the error has occurred, use a different filename or verify that the filename is not already in use. 2. If the issue persists, use a unique filename or disable the flag to fail on filename collision.
Code: 44.11.XX
Description: Error Event log message (Multifunction product only.). A Digital Send error has occurred.
Remedy: Try to send the job again. Check the Digital Send configuration.
Code: 44.12.0E
Description: Error Event log message (Multifunction product only.). Digital Send, the attachment filename already exists at the destination, and the flag to fail on filename collisions is set. This file will not be sent.
Remedy: 1. If this is the first time the error has occurred, use a different filename or verify that the filename is not already in use. 2. If the issue persists, use a unique filename or disable the flag to fail on filename collision.
Code: 44.12.XX
Description: Error Event log message (Multifunction product only.). A Digital Send error has occurred.
Remedy: Try to send the job again. Check the Digital Send configuration.