HP LaserJet Pro MFP M130

Error Code:

Code: 58.XX
Description: The product has experienced an error with the low voltage power supply. • 58.04 = Low voltage power supply malfunction
Remedy: 1. Reset the printer:a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on. 3. Check the voltage label on the back of the product. If the product is rated 220V and is plugged into a 110V outlet, this error might occur. In most cases, no damage is caused to the product. If a power transformer is used to convert 220V power to 110V, verify that the transformer power rating is sufficient to operate the product.4. If the error persists, replace the Low Voltage Power Supply PCB Assembly: L.V.POWER SUPPLY PCB ASS'Y (110–127V) RM2–0840–000CN L.V.POWER SUPPLY PCB ASS'Y (220–240V) CHINA ONLY RM2-0842–000CN L.V.POWER SUPPLY PCB ASS'Y (220–240V) EXCEPT CHINA RM2-0841–000CN5. If the error persists, replace the product.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home