HP LaserJet M436 MFP
- Code: U1-2132, U1-2315, U1-2320
- Display: U1-2132, U1-2315, U1-2320, U1-2330, U1-2334, U1-2340, U1-234H Fuser unit failure errors
- Description: –U1-2132, Error: #U1-2132 / Fuser Unit Failure: #U1-2132. Turn off then on. Call for service if the problem persists–U1-2315, Error: #U1-2315 / Fuser Unit Failure: #U1-2315. Turn off then on. Call for service if the problem persists–U1-2320, Error: #U1-2320 / Fuser Unit Failure: #U1-2320. Turn off then on. Call for service if the problem persists–U1-2330, Error: #U1-2330 / Fuser Unit Failure: #U1-2330. Turn off then on. Call for service if the problem persists–U1-2334, Error: #U1-2334 / Fuser Unit Failure: #U1-2334. Turn off then on. Call for service if the problem persists–U1-2340, Error: #U1-2340 / Fuser Unit Failure: #U1-2340. Turn off then on. Call for service if the problem persists–U1-234H, Error: #U1-234H / Fuser Unit Failure: #U1-234H. Turn off then on. Call for service if the problem persists
The temperature control of the Fuser Unit is abnormal. - Remedy: 1. Turn the printer off then on.2. If the error persists, send an on-site technician to perform the remaining steps.3. Turn the printer off, remove, then re-install the Fuser Unit.4. If the error persists. Turn the printer off and remove the Fuser Unit.a. Check the fuser connector for bent or broken pins.b. Check if the input voltage is normal.c. Check if the thermistor is twisted or contaminated; and is in contact with the Heat Roller.5. After confirming continuity in the fuser connector and the error still exists; replace the below parts in order: › Fuser Unit (HP Part #: SAM-JC91.01217A) › LVPS.SMPS Power Supply (HP Part #: SAM-JC44.00223A) › HVPS (HP Part #: SAM-JC44.00229A)
| Error Code | |
| Service Mode, Troubleshooting | |
| Parts Catalog | |
| Compatibility | |
| Downloads Files | |
| Home |
Send message to us