HP DesignJet Z6100
- Code: 08:11
- Description: Problem with communication between the Front Panel, the Formatter and the HDD.
- Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Front Panel cable is not damaged and is correctly connected to the Front Panel and to the Interconnect PCA. • Check that the Memory Module is installed correctly. • Check that the cables between the Interconnect PCA and the Main PCA are not damaged and are correctly connected. • Check that the cables between the Hard Disk Drive and the Power Supply Unit and the Main PCA are not damaged and are correctly connected. • Check that the cable between the Power Supply Unit and the Main PCA is not damaged and is correctly connected. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Replace the Hard Disk Drive . • Replace the Main PCA . • Replace the Memory Module . • Replace the Interconnect PCA . • Replace the Front Panel . • Replace the Sausalito PCI PCA.
Error Code | |
Service Mode, Troubleshooting | |
Parts Catalog | |
Compatibility | |
Downloads Files | |
Home |
Send message to us