Brother MFC9140CDN

Error Code:

Code: 0201
Display: Print Unable 02 Turn the power off and then back on again.
Description: Synchronization signal from the main motor cannot be detected. Or the main motor speed is unstable after a set period of time.
Causes: 1 Main motor harness connection failure 2 Harness connection failure between the low-voltage power supply PCB and main PCB 3 Main motor failure 4 Low-voltage power supply PCB failure 5 Main PCB failure
Remedy: Check the main motor harness connection and reconnect it. Check the harness connection between the low-voltage power supply PCB and main PCB, and reconnect it. Replace the process drive unit. Replace the low-voltage power supply PCB ASSY. Replace the main PCB ASSY.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home