Xerox WorkCentre 5325

Purpose

It is possible to refer to or set/change the NVM data.

NOTE: All the NVM data including the NVM for the Key Operator are accessible. However, Billing and Auditron Administration Password cannot be rewritten.

Procedure

1. Enter UI Diagnostics (Accessing UI Diagnostics)
2. Select NVM Read/Write on the Maintenance/Diagnostics screen.
   NOTE: The machine does not accept, for example, 700-6 as an abbreviation of 700-006. When a number starts with 0, the 0 must be entered.
3. Input the Chain-Link number and select Confirm / Change.
4. The Current Value and the New Value columns are displayed.
5. Enter the value that you wish to change to into the New Value column using the keypad and select Save. The entered value can be cleared using the C button.
   NOTE: If the entered value is invalid, the following message is displayed: Incorrect value. Please re-enter. For a complete list of NVM locations and descriptions, refer to NVM Tables, under the Library tab of the Service Interface
6. The entered number is displayed in the Current Value column.
7. Select Close to return to the Maintenance / Diagnostics screen.