Xerox WorkCentre 3315
Troubleshooting. No Power
When system power is turned on, all lamps on the operator panel do not come on.
Initial Actions
• Turn the printer off and then on again.
• If the problem persists continue troubleshooting.
Applicable Parts
• LVPS, PL3.1.5, LVPS
• Main Board, PL1.0.11 Phaser 3320, PL6.1.6 WorkCentre 3315/3325
Step | Actions and Questions | Yes | No |
---|---|---|---|
1 | Check the connection to the wall outlet. Is the printer connected to the outlet? |
Go to step 2. | Connect to the wall outlet. |
2 | Check the condition of the Power Cord. Is the Power Cord damaged? |
Replace the Power Cord. | Go to step 3. |
3 | Check the wall outlet. Is the proper supply voltage present? |
Go to step 4. | Use a different outlet. |
4 | Replace the LVPS | Complete. |