Toshiba e-Studio 6530C
Adjustment. Color Registration Control
After having finished the “Automatic initialization of image quality control (05-396)” procedure, perform the “Forced performing of color registration control adjustment (05-4719)” procedure.
Code: 4719
Item to be adjusted
Forced performing of color registration control
Contents
Procedure
- While pressing [0] and [5] simultaneously, turn the power ON. → Adjustment mode
- Key in [4719] and press the [START] button.
- When the adjustment finishes normally, the equipment returns to the initial state of Adjustment Mode.
When an error occurs
When “Waste toner box replacement” is displayed
- Replace the waste toner box with a new one and close the waste toner box cover.
- Release the waste toner box full status by the warming-up operation.
- Check that “WAIT” is displayed.
When “ERROR” is displayed
- Press and hold the [ON/OFF] button for a few seconds to shut down the equipment in order to check the toner empty status.
- Turn the power ON.
- Check the toner supply operation in warming-up. When a message prompts you to replace the toner cartridge, open the front cover and replace the cartridge with a new one.
- Check that “WAIT” is displayed.