Toshiba e-Studio 351c
Maintenance. Checklist 2
F. Main charger
| Items to check | Cleaning | Lubrication/ Coating |
Replacement (KD) |
Operation check |
Parts list <P-I> | Remarks | |
|---|---|---|---|---|---|---|---|
| F1 | Main charger case | B | *f1 | ||||
| F2 | Main charger wire | 130/160/200 | O | 28-15 | *f1 | ||
| F3 | Contact point of terminals | B | 28-4,9 | ||||
| F4 | Charger wire cleaning pad | 130/160/200 | 28-12 | ||||
| F5 | Main charger grid | 130/160/200 | 28-21 | ||||
G. Drum/Cleaner related section
| Items to check | Cleaning | Lubrication/ Coating |
Replacement (KD) |
Operation check |
Parts list <P-I> | Remarks | |
|---|---|---|---|---|---|---|---|
| G1 | Photoconductive drum | 130/160/200 | 103-1 | Refer to Chapter 4.8.2 | |||
| G2 | Drum stay | B | *g1 | ||||
| G3 | Whole cleaner unit | B | |||||
| G4 | Drum cleaning blade | 130/160/200 | 32-10 | *g2 | |||
| G5 | Drum cleaner brush | 130/160/200 | 32-5 | *g2 | |||
| G6 | Recovery blade | B | R | 32-26 | *g3 | ||
| G7 | Used toner auger drive section | W1 | |||||
| G8 | Discharge LED | B | 28-32 | ||||
| G9 | Ozone filter | 130/160/200 | 14-31 | ||||
Note:
Check the color deviation after replacing G1 and G4.
H. Toner bag
| Items to check | Cleaning | Lubrication/ Coating |
Replacement (KD) |
Operation check |
Parts list <P-I> | Remarks | |
|---|---|---|---|---|---|---|---|
| H1 | Toner bag | 50 | 103-6 | ||||
I. Black developer unit
| Items to check | Cleaning | Lubrication/ Coating |
Replacement (KS) |
Operation check |
Parts list <P-I> | Remarks | |
|---|---|---|---|---|---|---|---|
| I1 | Whole black developer unit | B | |||||
| I2 | Black developer unit drive section | W1 | |||||
| I3 | Developer material (K) | 100/120/150 | 103-2 | *i1 | |||
| I4 | Front shield | B | R | 34-39 | |||
| I5 | Oil seal (4 pcs.) | AV | R | 34-3,15 | *i2 | ||
| I6 | Guide roller | B or A | 34-17 | ||||
| I7 | Toner cartridge drive gear | W1 | |||||
| I8 | Side shield | B | R | 34-37,38 | |||
| I9 | Front bearings of mixers | AV | R | 34-8 | *i3 | ||
J. Color developer unit / Revolver unit
| Items to check | Cleaning | Lubrication/ Coating |
Replacement (KS) |
Operation check |
Parts list <P-I> | Remarks | |
|---|---|---|---|---|---|---|---|
| J1 | Whole color developer unit (Y, M and C) | B | |||||
| J2 | Color developer unit drive section (Y, M and C) | W1 | |||||
| J3 | Developer material (Y, M, and C) | 24/30/37.5 | 103-3 | *j1 | |||
| J4 | Front shield (Y, M and C) | B | R | 33-24 | |||
| J5 | Oil seal (4 pcs. for each color) |
AV | R | 33-4,14 | *j2 | ||
| J6 | Toner cartridge drive gear (Y, M and C) | W1 | |||||
| J7 | Revolver drive gear | W1 | |||||
| J8 | Color auto-toner sensor | B | AV | 36-18 | *j3 | ||
| J9 | Side shield | B | R | 33-39,40 | |||
| J10 | Polarity adjustment plate | FL | 33-9 | *j4 | |||
| J11 | Color toner cartridge sensor | B | 36-104 | *j5 | |||
| J12 | Front bearings of mixers | AV | R | 33-12 | *j6 | ||