Toshiba e-Studio 320P

Entering CONFIG MENU

1. Turn the printer off.
2. Press and hold the Select and Return buttons.
3. Turn the printer on.
4. Release the buttons when Performing Self Test displays on the operator panel.

The menu items appear on the operator panel in the order shown:

Maint Cnt Value
Reset Maint Cnt
Prt Quality Pgs
Panel Menus
PPDS Emulation
Download Emuls
Demo Mode
Factory Defaults
NARROW MEDIA
Energy Conserve
ERROR LOG
Paper Prompts
Env Prompts
Reduced Curl
Exit Config Menu

Select Exit Config Menu to exit the Configuration Menu and return to normal mode.

Maint Cnt Value

This menu lets you view the maintenance count value. It only displays if Maintenance Warning and Intervention function is enabled in the configuration ID. The maintenance interval is determined by page count.

Select Maint Cnt Value from the CONFIG MENU.

Press Return to exit.

Reset Maint Cnt

When 80 Scheduled Maintenance appears and the maintenance kit is installed (see “Scheduled maintenance”), this number should be reset.

1. Select Reset Maint Cnt from the CONFIG MENU.
2. Press Select to reset the counter to zero. Press Return to cancel.

Prt Quality Pgs

To print the Print Quality Pages:

1. Select Prt Quality Pgs from CONFIG MENU.
2. Press Select. Four pages print. Additional button presses are ignored until the pages have printed. If duplex is selected, the pages print front and back.

The first page is a mix of graphics and text. The second two pages are graphics, and the last page is blank.

The Print Quality Pages can also be printed from the Diagnostics Mode.