Toshiba e-Studio 220P

Power–On Operations

To access the printer operations:

1. Turn off the printer.
2. Press and hold the buttons in the following table for the operation needed.
3. Turn on the printer. Hold the buttons until the lights cycle on the operator panel.

Enter Configuration Menu mode

1. 1. Power on with top cover open and Continue pressed.
2. Close cover once the error light is displayed.

Print the Print Quality test pages

Top cover open with Continue pressed. (Cartridge Lockout function enabled)

Enter Diagnostics mode

1. Power on with top cover open and Cancel pressed.
2. Close cover once the error light is displayed.

Print the Print Quality test pages

Top cover open with Cancel pressed. (Cartridge Lockout function disabled)

Reset NVRAM and enter Normal mode

1. Power on with top cover open and both Continue and Cancel buttons pressed.
2. Close cover once the error light is displayed.