Toshiba e-Studio 2010AC

Overview

Each mode of the self-diagnostic codes can be used by selecting the keyword of the screen in the Service UI.

The codes which are used frequently can be selected in the Service UI. The Service UI can be used in the following modes in the FS Menu.

• 05 ADJUSTMENT MODE
• 08 SETTING MODE

Notes: Not all codes can be used in the Service UI. For the codes available with the Service UI, refer to the “Self-diagnostic code list” (separate document).

Operation procedure

1. Start the FS Menu. Select the mode of the above Service UI and press [Next].
2. Select the item whose setting is to be changed and press [Next] until the code number is displayed. The display shifts to the classic screen of the selected code.

Starting the FS Menu from the normal mode

If the [Tool] icon is displayed on the USER FUNCTIONS menu of the normal mode, the FS Menu can be started.

1. Turn the power ON.
2. Enter the user name and password if necessary. *
3. Press [USER FUNCTIONS] on the HOME screen.
4. Press the [Tool] icon on the upper left of the screen for at least 3 seconds
>
5. Enter the service password and press [OK]. The FS Menu appears.

* When “3” is set for FS-08-8911 (security mode), the authentication screen is always displayed.

Notes:

• The service password needs to be changed to log in for the first time.
• In case the password is forgotten, ask the administrator to reset the service password
• Note that the user data are deleted at that time.