Toshiba e-Studio 2010AC
Service Mode. Overview
This equipment consists of two servicing menus which have different start-up methods. Setting and adjustment can be performed by entering into a mode such as [05 ADJUSTMENT MODE] or [49 Firmware Update] from each menu.
FS Menu
Mode | Contents | |
---|---|---|
03 TEST MODE | Checks the status of input/output signals. | |
04 TEST PRINT MODE | Outputs the test patterns. | |
05 ADJUSTMENT MODE | Adjusts various items. | |
08 SETTING MODE | Sets various items. | |
20 PM SUPPORT MODE | Clears each counter. | |
30 LIST PRINT MODE | Prints various lists or outputs them in a CSV format. | |
31 CHART PRINT MODE | Prints the charts. | |
FAX | 11 FAX CLEAR MODE | Sets the fax board. |
12 FAX LIST PRINT MODE | Outputs the contents set for the fax functions. | |
13 FAX FUNCTION MODE | Sets the fax functions. | |
19 RAM EDIT MODE | This is the mode for the special settings. (This is not used generally.) | |
35 DATA BACKUP/RESTORE MODE | Backs up or restores data. | |
36 CLONING | Creates and installs clone files. | |
37 LICENSE MANAGEMENT | Manages the license of applications. |
HS Menu
Mode | Contents |
---|---|
01 Control Panel Check | Checks various contents regarding the LCD, LED, hard keys and digital keys on the control panel. |
49 Firmware Update | Performs firmware update with a USB storage device. |
59 SRAM Data Cloning | Backs up the SRAM data to a USB storage device. |
73 Firmware Assist | Clears error flags or SRAM, or safely deletes data in the HDD or SRAM to support the replacement of the SYS board, SRAM or HDD. |
74 HDD Assist | Assists the Security HDD by checking the type of the mounted HDD or removing keys. |
75 File System Recovery | Checks, recovers or initializes the file system (HDD). |
76 SRAM Maintenance | Recovers the equipment from particular errors such as F800 or F900. |
* Only the modes which are available for this equipment are displayed on each menu.
Cancellation of the self-diagnostic mode
The modes, which can be entered from [FS Menu], can be canceled by the following methods.
- When [FS Menu] is displayed on the screen: Press [FS Menu] to return to the menu screen. Press [NORMAL]. The self-diagnostic mode finishes and the [HOME] screen appears. Rebooting/non-rebooting of the equipment will be performed depending on the mode worked and the code operated.
- When only [Return] is displayed on the screen: Press [Return] for several times until [FS Menu] is displayed on the screen. When [FS Menu] appears, press it.
- When neither [Return] nor [FS Menu] are not displayed on the screen: Press the [ON/OFF] button and perform the shut-down operation on the screen displayed.
To cancel the modes, which can be entered from [HS Menu] press the [ON/OFF] button for a few seconds to shut down the equipment.
Changing/setting of the service password
- The [SETTINGS] screen is displayed by press [SETTINGS] on [FS Menu].
- Press [Service Password] to change or reset the service password.