Sharp MXM753N
Troubleshooting. JAM code list. Option
| JAM code | Content | JAM detection method | ||
|---|---|---|---|---|
| JAM detection timer start trigger | JAM judge detector | |||
FIN |
FPED_N | Inlet port not-reached JAM | FPED ON | FPED does not turn ON within the specified time. |
| FPED_S | Inlet port remaining JAM | FPED OFF | FPED does not turn OFF within the specified time. | |
| FSPPD_N | Saddle not-reached JAM | FSPPD ON | FSPPD does not turn ON within the specified time. | |
| FSPPD_S | Saddle remaining JAM | FSPPD OFF | FSPPD does not turn OFF within the specified time. | |
| FATPD_S | Bundle discharge remaining JAM | FATPD OFF | FATPD does not turn OFF within the specified time. | |
| FSMJ | Staple motor JAM | Staple operation start | FSHS does not turn ON within the specified time. | |
| FPMJ | Punch motor JAM | Punching operation start | FPCHPS does not turn ON within the specified time. | |
| FIN_TIME | Finisher paper early reaching JAM | POD2 ON (front paper) | POD2 turns ON earlier than the specified timing. (detection paper) | |
| FIN_PAOF | Paper attribute data reception overflow | — | Reception of paper attribute data exceeds the allowable buffer limit. | |
| FPJD_T_N | Interface not-reached JAM | FPJD_T ON | FPJD_T does not turn ON within the specified time. | |
| FPJD_T_S | Interface remaining JAM | FPJD_T OFF | FPJD_T does not turn OFF within the specified time. | |
| FPJD_N | Paper exit not-reached JAM | FPJD ON | FPJD does not turn ON within the specified time. | |
| FPJD_S | Paper exit remaining JAM | FPJD OFF | FPJD does not turn OFF within the specified time. | |
| PPD_FIN | PPD JAM (Finisher communication abnormality) |
— | ||
| FDRLMJ | Delivery roller lift motor JAM | — | Delivery roller lift motor trouble detection (during JOB) | |
| FGMJ | Gripper motor JAM | — | Gripper motor trouble detection (during JOB) | |
| FGAMJ | Gripper arm motor JAM | — | Gripper arm motor trouble detection (during JOB) | |
| FARLMJ | Paper alignment roller lift motor JAM | — | Paper alignment roller lift motor trouble detection (during JOB) | |
| FPTPDMJ | Paper tail push down motor JAM | — | Paper tail push down motor trouble detection (during JOB) | |
| FDPHMJ | Delivery paper holding motor JAM | — | Delivery paper holding motor trouble detection (during JOB) | |
| FPTHMJ | Paper tail holding motor JAM | — | Paper tail holding motor trouble detection (during JOB) | |
| INSERTER | REG_SEN_N | Registration sensor not-reached JAM | REG_SEN ON | REG_SEN does not turn ON within the specified time. |
| REG_SEN_S | Registration sensor remaining JAM | REG_SEN OFF | REG_SEN does not turn OFF within the specified time. | |
| TIM_SEN_N | Timing sensor not-reached JAM | TIM_SEN ON | TIM_SEN does not turn ON within the specified time. | |
| TIM_SEN_S | Timing sensor remaining JAM | TIM_SEN OFF | TIM_SEN does not turn OFF within the specified time. | |
| HI_SEN_NI | Paper exit not-reached JAM (When feeding paper from the inserter.) | HI_SEN ON | HI_SEN does not turn ON within the specified time from the paper feed motor ON. | |
| HI_SEN_NP | Paper exit not-reached JAM (When feeding paper from the machine.) | HI_SEN_ON | HI_SEN does not turn ON within the specified time after reception of the machine paper exit command. | |
| HI_SEN_S | Paper exit remaining JAM | HI_SEN OFF | HI_SEN does not turn OFF within the specified time from TIM_SEN OFF. | |
| H_SEN_NF | Reverse sensor not-reaching JAM (When entering the reverse path) | H_SEN ON | HI_SEN does not turn ON within the specified time from H_MOT ON. | |
| H_SEN_NB | Reverse sensor not-reaching JAM (When discharging from the reverse path) | H_SEN ON | HI_SEN does not turn ON within the specified time from H_MOT ON. | |
| H_SEN_SF | Reverse sensor remaining JAM (When entering the reverse path) | H_SEN OFF | HI_SEN does not turn OFF within the specified time from TIM_SEN OFF. | |
| H_SEN_SB | Reverse sensor remaining JAM (When discharging from the reverse path) | H_SEN OFF | H_SEN does not turn OFF within the specified time from H_SEN ON. | |
| LCC | LCC | Side LCC paper feed JAM (LPFD not-reached) | LPFC ON (paper feed start) | LPFD does not turn ON within the specified time. |
| LPFD_SL | LPFD remaining JAM (Side LCC feed paper) | LPFD ON | LPFD does not turn OFF within the specified time. | |