Sharp MXM753N
Troubleshooting. JAM code list. DSPF
| JAM code | JAM content | JAM detection method | |
|---|---|---|---|
| JAM detection start trigger | JAM judgment condition | ||
| SPPD1_N | SPPD1 not-reached JAM | Paper feed start (When the document width is more than B5 size.) |
SPPD1 ON |
| SPPD2_N | SPPD2 not-reached JAM | Paper feed start (When the document width is less than B5 size.) |
SPPD2 ON |
| SPPD1 ON (When the document width is more than B5 size.) |
SPPD2 ON | ||
| SPPD3_N | SPPD3 not-reached JAM | Restart at the temporal stop position | SPPD3 ON |
| SPPD5_N | SPPD5 not-reached JAM | SPPD3 ON | SPPD5 ON |
| SPOD_N | SPOD not-reached JAM | SPPD5 ON | SPOD ON |
| SPPD1_S | SPPD1 remaining JAM | SPPD1 ON (When the document width is more than B5 size.) |
SPPD1 OFF |
| SPPD2_S | SPPD2 remaining JAM | SPPD2 ON (When the document width is less than B5 size.) |
SPPD2 OFF |
| SPPD1 OFF (When the document width is more than B5 size.) |
SPPD2 OFF | ||
| SPPD3_S | SPPD3 remaining JAM | SPPD2 OFF | SPPD3 OFF |
| SPPD5_S | SPPD5 remaining JAM | SPPD3 OFF | SPPD5 OFF |
| SPOD_S | SPOD remaining JAM | SPPD5 OFF | SPOD OFF |
| SPSD_SCN | Exposure start notification timer end | Arrival at temporal stop position | Exposure start command from ICU to SCU no reception time-out (120 sec) |
| P_SHORT | Short size JAM | SPPD3 ON | When the document length is less than 120.0mm. |
| ICU_REQ | ICU factor stop JAM | — | Stop by a job stop request commend from ICU to SCU |
| STOP_JAM | Emergency stop JAM | — | Trouble mode transition request from ICU to SCU Emergency stop by a command |