| Main |
Sub |
Functions |
Section |
| 43 |
1 |
Used to make the fusing reference temperature setting 1 in each operation mode. |
|
| 4 |
Used to set the fusing temperature 2 in each operation mode. |
|
| 20 |
Used to set the environmental correction under low temperature and low humidity (L/L) for the fusing temperature setting (SIM 43-1) in each paper mode. |
|
| 21 |
Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-1) in each paper mode. |
|
| 22 |
Used to set the environment correction under low temperature and low humidity (L/L) for the fusing temperature setting (SIM 43-4) in each paper mode. |
|
| 23 |
Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-4) in each paper mode. |
|
| 24 |
Used to set the correction of the temperature adjustment value of SIM 43-1 and 43-4. |
|
| 31 |
Used to check the operation of the fusing web cleaning motor. |
Fusing |
| 32 |
Used to set various items related to the forcible operation of web cleaning when job end. |
Fusing |
| 34 |
Used to check the operation of the fusing lower web cleaning motor. |
Fusing |
| 44 |
1 |
Used to set each correction operation function in the image forming (process) section. |
Process (Photo-conductor/Developing/ Transfer/Cleaning) |
| 2 |
Used to adjust the sensitivity of the image density sensor. |
Process |
| 4 |
Used to set the conditions of the high density process control operation. |
Process |
| 6 |
Used to execute the high density process control forcibly. |
Process |
| 9 |
Used to display the result data of the high density process control operation. |
Process (Photo-conductor/Developing/ Transfer/Cleaning) |
| 12 |
Used to display the operation data of the high density process control and the image density sensor. |
Process (Photo-conductor/Developing) |
| 14 |
Used to display the output level of the temperature and humidity sensor. |
Process (Photo-conductor/Developing)/ Fusing |
| 16 |
Used to display the toner density control data. |
|
| 21 |
Used to register the target value of the half-tone process control. |
Process |
| 22 |
Used to display the toner patch density level in the half tone process control operation. |
Process |
| 24 |
Used to display the correction target and the correction level in the half tone process control operation. |
Process |
| 25 |
Used to set the calculating conditions of the correction value for the half tone process control. |
Process |
| 26 |
Used to execute the half tone process control compulsory. |
Process |
| 27 |
Used to clear the correction data of the half tone process control. |
Process |
| 28 |
Used to set the process control execution conditions. |
Process |
| 29 |
Used to set the operating conditions of the process control during a job. |
Process |
| 37 |
Used to set the development bias correction level in the continuous printing operation. |
|
| 46 |
2 |
Used to adjust the copy density in each monochrome copy mode. |
|
| 4 |
Used to adjust the density in the image send mode. |
|
| 5 |
Used to adjust the density in the image send mode. |
|
| 8 |
Used to adjust the image send mode color balance RGB. |
|
| 9 |
Used to adjust the SPF mode scan image density (copy, image send mode) |
|
| 10 |
Used to adjust the copy density (in each copy mode). |
|
| 16 |
Used to adjust the copy density manually. |
|
| 19 |
Used to set the operating conditions of document density scanning (copy, image send mode). |
|
| 23 |
Used to set the density correction of copy high density section (High density tone gap supported). |
|
| 24 |
Copy density adjustment (Auto adjustment) |
|
| 32 |
Used to adjust the reproducibility of the document background density in the automatic copy mode. |
|
| 37 |
Used to adjust the reproducibility of the scan image color document (copy, image send mode). |
|
| 39 |
Used to adjust the sharpness of FAX send images. |
|
| 40 |
Used to adjust the FAX send image density. (Collective adjustment of all the modes) |
|
| 41 |
Used to adjust the FAX send image density. (Normal) |
|
| 42 |
Used to adjust the FAX send image density. (Fine) |
|
| 43 |
Used to adjust the FAX send image density. (Super Fine) |
|
| 44 |
Used to adjust the FAX send image density. (Ultra fine) |
|
| 45 |
Used to adjust the FAX send image density. (600dpi). |
|
| 47 |
Used to set the compression rate of copy and scan images (JPEG). |
|
| 51 |
Used to adjust the gamma for the copy mode heavy paper mode and the image process mode (manual adjustment). |
|
| 52 |
Used to set the gamma default for the copy mode heavy paper and the image process mode. (The set values of SIM46-51 are set to the default values.) |
|
| 60 |
Used to adjust the automatic copy mode sharpness. |
|
| 61 |
Used to adjust the area separation recognition level in the image send mode (color, gray, auto exposure mode). |
|
| 62 |
Used to set the operating conditions of the ACS, the area separation, the background image process, and the automatic exposure mode. |
|
| 63 |
Used to adjust the density in the low density area of a scan image. |
Scan mode |
| 74 |
Used to adjust the copy density and the printer density. (Automatic adjustment) |
|
| 90 |
Used to set the process operation of high-compression PDF images. |
|
| 48 |
1 |
Used to adjust the scan image magnification ratio (in the main scanning direction and the sub scanning direction). |
|
| 5 |
Used to correction the scan image magnification ratio (in the sub scanning direction). |
|
| 6 |
Used to adjust the rotation speed of each motor. |
|