Sharp MXM753
Troubleshooting. JAM code list. Main unit 2
| JAM code | JAM content | JAM detection method | Basic distance (A) [mm] |
JAM margin distance (B) [mm] | JAM detection distance (A+B) [mm] | ||
|---|---|---|---|---|---|---|---|
| JAM detection start trigger | JAM judgment ion |
||||||
| PPD_PRI | PPD JAM (The IMAGE_PREPARE request is not sent from the ICU.) |
The IMAGE_ PREPARE command is sent from the PCU to the ICU. |
The END_IMAGE_ PREPARE command is received from the ICU. (50 sec) |
– | – | – | |
| POD1_N | POD1 not-reached JAM | PPDOn | POD1 On | 313.5mm | 65.0mm | 378.5mm | |
| POD1_S | POD1 remaining JAM | PPDOff | POD1 Off | 313.5mm | 65.0mm | 378.5mm | |
| POD1_FUS | POD1 JAM (Detection of winding around the fusing unit) |
Warm-up | Fusing thermistor temperature abnormality | – | – | – | |
| POD2_N | POD2 not-reached JAM | POD1 On | POD2 On | 69.3mm | 65.0mm | 134.3mm | |
| POD2_SR | POD2 remaining JAM (When discharging to the right side of the machine) |
POD1 Off | POD2 Off | 60.0mm | 65.0mm | 125.0mm | |
| POD2_SL | POD2 remaining JAM (When discharging to the left side of the machine) |
Reversing start | POD2 Off | Paper transport direction length - 14.4 | 65.0mm | Paper transport direction length - 14.4 + 65.0 | |
| AINPD_N | ADU paper entry sensor not-reached JAM | Reversing start | AINPDOn | 71.1mm | 65.0mm | 136.1mm | |
| AINPD_S | ADU paper entry sensor remaining JAM | POD2 Off | AINPDOff | 85.5mm | 65.0mm | 150.5mm | |
| APPD1_N | ADU transport sensor 1 not-reached JAM | AINPD On | APPD1 On | 169.7mm | 65.0mm | 234.7mm | |
| APPD1_S | ADU transport sensor 1 remaining JAM | AINPD Off | APPD1 Off | 169.7mm | 65.0mm | 234.7mm | |
| APPD2_N | ADU transport sensor 2 not-reached JAM | APPD1 On | APPD2 On | 175.0mm | 65.0mm | 240.0mm | |
| APPD2_S | ADU transport sensor 2 remaining JAM | APPD1 Off | APPD2 Off | 175.0mm | 65.0mm | 240.0mm | |
| DESK1 | Multi-stage tray 1 paper feed JAM (M1PFD not-reached) | M1PFC On | M1PFD On | 113.5mm | 65.0mm + 1sec | 178.5mm + 1sec | |
| M1PFD_N2 | M1PFD not-reached JAM (Multi-stage tray 2 feed paper) | M2PFD On | M1PFD On | 107.0mm | 65.0mm | 172.0mm | |
| M1PFD_S1 | M1PFD remaining JAM (Multi-stage tray 1 feed paper) |
M1PFC Off | M1PFD Off | 118.7mm | 65.0mm | 183.7mm | |
| M1PFD_S2 | M1PFD remaining JAM (Multi-stage tray 2 feed paper) |
M2PFD Off | M1PFD Off | 107.0mm | 65.0mm | 172.0mm | |
| DESK2 | Multi-stage tray 2 paper feed JAM (M2PFD not-reached) | M2PFC On | M2PFD On | 113.5mm | 65.0mm + 1sec | 178.5mm + 1sec | |
| M2PFD_S | M2PFD remaining JAM | M2PFC Off | M2PFD Off | 118.7mm | 65.0mm | 183.7mm | |
| BPT | Manual feed tray paper feed JAM (MPFD1 not-reached) | MPFPFC On | MPFD1 On | 58.4mm | 65.0mm + 1sec | 123.4 + 1sec | |
| MPFD1_S | MPFD1 remaining JAM | MPFPFC Off | MPFD1 Off | 68.4mm | 65.0mm | 133.4mm | |
| LPPD_N | LPPD not-reached JAM | Reception of the paper feed start command from the LCC. | LPPD On | 85.0mm | 65.0mm | 150.0mm | |
| LPPD_S | LPPD remaining JAM | Reception of the paper feed complete command from the LCC. | LPPD Off | 85.0mm | 65.0mm | 150.0mm | |
*1: The distance (length) divided by the process speed is the time.
Process speed 62 PPM Model 335mm/sec
Process speed 75 PPM Model 395mm/sec