| Main |
Sub |
Functions |
Section |
| 24 |
1 |
Used to clear the jam counter, and the trouble counter. |
|
| 2 |
Used to clear the number of use (the number of prints) of each paper feed section. |
Paper feed, paper reverse/transport |
| 3 |
Used to clear the finisher, DSPF, and the scan (reading) unit counter. |
|
| 4 |
Used to clear the maintenance counter, the printer counters of the transfer unit and the fusing unit. |
|
| 5 |
Used to clear the developer counter. |
|
| 6 |
Used to clear the copy counter. |
|
| 7 |
Used to clear the OPC drum counter. |
|
| 9 |
Used clear the printer mode print counter and the self print mode print counter. |
|
| 10 |
Used to clear the FAX counter. (Only when FAX is installed) |
|
| 15 |
Used to clear the counters related to the scan mode and the image send. |
|
| 30 |
Used to initialize the administrator password. |
|
| 31 |
Used to initialize the service mode (Web page) password. |
|
| 25 |
1 |
Used to check the operations of the developing section, and to display the toner density detection level. |
Process (Developing section) |
| 2 |
Used to make the initial setting of toner density when replacing developer. (Automatic adjustment) |
Process (Photoconductor/Developing/ Transfer/Cleaning) |
| 26 |
2 |
Used to set the paper type and the weight type. |
Paper feed |
| 3 |
Used to set the specifications of the auditor. (Japan only) |
Auditor |
| 5 |
Used to set the count mode in A3 (11" x 17") print. |
|
| 6 |
Used to set the specifications of the destination. |
|
| 10 |
Used to set the trial mode of the network scanner. |
|
| 18 |
Used to set Disable/Enable of the toner save mode operation. (For the Japan and the UK versions.) |
|
| 30 |
Used to set the operation mode corresponding to the CE mark (Europe safety standards). |
|
| 35 |
Used to set the trouble history display mode. |
|
| 38 |
Used to set "Print continue" or "Print stop" when the maintenance timing is reached or the consumable part life is over. |
|
| 41 |
Used to set Enable/Disable of the magnification ratio automatic select function (AMS) in the center binding mode. |
|
| 49 |
Used to set the print speed of postcards mode. |
|
| 50 |
Used to set the operation specifications and functions. |
|
| 52 |
Used to set whether non-printed paper (insertion paper, cover paper) is counted up or not. |
|
| 53 |
Used to set Inhibit/Allow of the user auto calibration (gradation, density adjustment) in the copy mode. |
|
| 54 |
Used to set Inhibit/Allow of the user auto calibration (gradation, density adjustment) in the print mode. |
|
| 65 |
Used to set the limit of the staple process. |
|
| 69 |
Used to set the operating conditions for toner near end. |
|
| 73 |
Used to adjust the image loss (shade removal amount) in the poster, the continuous enlargement copy, the card scan, and the A3 wide copy mode. |
|
| 74 |
Used to set the OSA trial mode. |
|
| 78 |
Used to set the password of the remote operation panel mode. |
|
| 27 |
1 |
Used to set non-detection of communication error (U7-00) with RIC. (FSS function) |
|
| 2 |
Used to set the sender's registration number and the HOST server telephone number. (FSS function) |
|
| 4 |
Used to set the initial call and toner order auto send. (FSS function) |
|
| 5 |
Used to set the machine tag No. (FSS function) |
Communication (RIC/MODEM) |
| 6 |
Used to set of the manual service call. (FSS function) |
|
| 7 |
Used to set of the enable, alert call out. (FSS function) |
|
| 9 |
Used to set the paper transport time recording YES/NO threshold value and shading gain adjustment retry number. (FSS function) |
|
| 10 |
Used to clear the trouble prediction history information. (FSS function) |
|
| 11 |
Used to check the serial communication retry number and the scanner gain adjustment retry number history. (FSS function) |
|
| 12 |
Used to check the high-density and the half-tone process control error history. (FSS Function) |
|
| 13 |
Used to check the history of paper transport time between sensors. (FSS function) |
|
| 14 |
Used to set the FSS function connection test mode. |
|
| 30 |
1 |
Used to check the operations of the sensors and the detectors in other than the paper feed section and the control circuits. |
|
| 2 |
Used to check the operations of the sensors and the detectors in the paper feed section and the control circuits. |
|
| 33 |
1 |
Used to check the operations of the card reader sensor and the control circuit. |
|
| 2 |
Used to delete the ID (IDM) information of card. |
|
| 40 |
2 |
Manual paper feed tray paper width sensor adjustment. |
Paper feed |
| 7 |
Used to set the adjustment value of the manual paper feed tray paper width sensor. |
Paper feed |
| 12 |
Used to adjust the multi-purpose tray width detection level. |
Paper feed |
| 41 |
1 |
Used to check the operations of the document size sensor and the control circuit. |
|
| 2 |
Used to adjust the document size sensor detection level. |
|
| 3 |
Used to check the operations of the document size sensor and the control circuit. |
|