Sharp MXM350U
Maintenance. Engine section
- Self print of set values
Use of SIM 22-6 allows to print the set values and the jam history of the machine. These values must be printed before execution of maintenance or disassembly procedures. - When assembling, check that the flat cable and the harness connectors are securely connected.
- When connecting the flat cable, be careful not to break the pins.
- When installing the PWB unit and the memory module, use a Ground Strap to prevent damage caused by electrical discharge.
✕ Check (Clean, replace, or adjust as necessary.) ❍ Clean ▲ Replace Δ Adjust ✩ Lubricate ❏ Move position
Unit name | Part name | When calling |
100K | 200K | 300K | 400K | 500K | 600K | 700K | 800K | Remark |
---|---|---|---|---|---|---|---|---|---|---|---|
Drum peripheral | Drum | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ||
Cleaner blade | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | Replace at 200K or 1 year. P/G No.: [10]-49 |
||
Toner reception seal | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [10]-42 | ||
Side molt F | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [10]-33 | ||
Side molt R | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [10]-37 | ||
Transfer roller | ✕ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [5]-8 | |
Discharge plate | ✕ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [5]-2 | |
TR bearing (F/R) | ✕ | ✕ | ✕ | ▲ | ✕ | ✕ | ✕ | ▲ | P/G No.: [5]-9, 18 | ||
Transfer roller collar | ✕ | ✕ | ✕ | ▲ | ✕ | ✕ | ✕ | ▲ | P/G No.: [5]-10 | ||
After-transfer star ring | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | P/G No.: [5]-19 | ||
TR gear | ✕ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [5]-15 | |
Drum separation pawl unit | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [5]-501 | ||
MC unit | ✕ | ❍ | ▲ | ❍ | ▲ | ❍ | ▲ | ❍ | ▲ | Includes the screen grid, the charging plate, and the MC cleaner. ❍: Charging plate cleaning by the MC cleaner P/G No.: [9]-901 |
|
Paper guide | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ||
Developing section |
Developer | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ | Supplied when installing | |
DV blade | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [11]-55 | ||
DSD collar | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | |||
DV side seal F | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [11]-38 | ||
DV side seal R | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [11]-43 | ||
Toner cartridge | – | – | – | – | – | – | – | – | Attached when installing./ 750g, user replacement for every 35K. |
||
Fusing section | Upper heat roller | ✕ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [7]-46 |
Lower heat roller | ✕ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [7]-22 | |
Upper separation pawl | ❍ | ❍ | ▲ | ❍ | ▲ | ❍ | ▲ | ❍ | ▲ | P/G No.: [7]-3 | |
Lower separation pawl | ❍ | ❍ | ▲ | ❍ | ▲ | ❍ | ▲ | ❍ | ▲ | P/G No.: [7]-41 | |
Thermistor | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | Clean and remove paper dust. | |
Upper heat roller gear | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [7]-47 | ||
Paper guides | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ||
Gears | ✩ | ✩ | ✩ | ✩ | ✩ | ✩ | ✩ | ✩ | |||
CL roller | ✕ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [7]-52 | |
CL roller bearing | ✕ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | ✕ | ▲ | P/G No.: [7]-53 | |
Filters | Ozone filter | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ | P/G No.: [12]-2 | |
Paper feed section |
Pick-up roller | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | Note 1 |
Paper feed roller | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | Note 1 | |
Separation roller | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | Note 1 | |
Torque limiter | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | Note 1 | |
Transport section Paper exit reverse section | Resist roller | ✕ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | |
Transport rollers | ✕ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ||
Transport paper guides | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ||
Paper dust remover unit | ❍ | ❍ | ▲ | ❍ | ▲ | ❍ | ▲ | ❍ | ▲ | P/G No.: [14]-51 | |
Optical reflection sensor | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | ❍ | PS roller unit section | |
Drive section | Gears (Specified position) | ✕ | ✩ | ✩ | ✩ | ✩ | ✩ | ✩ | ✩ | ✩ | |
Belts | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ||
Image quality | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ||
Other | Sensors | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | ✕ | Clean with air. |
Note 1:
Replacement reference:Use the counter value of each paper feed port as the replacement reference.
Paper feed roller/Separation pad/Torque limiter section (Include Desk, Multi purpose): 100K or 1 year