Sharp MXM315NE
Simulation mode. List of codes 24-41
Main | Sub | Functions | Section |
---|---|---|---|
24 | 1 | Used to clear the jam counter, and the trouble counter. (After completion of maintenance, clear the counters.) | |
2 | Used to clear the number of use (the number of prints) of each paper feed section. | ||
3 | Used to clear the finisher, RSPF, and the scan (reading) unit counter. | ||
4 | Used to clear the maintenance counter, the printer counters of the transport unit and the fusing unit. (After completion of maintenance, clear the counters.) | ||
5 | Used to clear the developer counter. (After replacement of developer, clear the counter.) | ||
6 | Used to clear the copy counter. | ||
9 | Used clear the printer mode print counter and the self print mode print counter. | ||
10 | Used to clear the FAX counter. (Only when FAX is installed) | ||
12 | Used to clear the document filing counter value. | ||
15 | Used to clear the counters related to the scan mode and the image send. | ||
30 | Used to initialize the administrator (Admin) password. | ||
31 | Used to initialize the service mode password. | ||
35 | Used to clear the toner cartridge use status data. | ||
25 | 1 | Used to check the operations of the developing section. | Process (Developing section) |
2 | Used to make the initial setting of toner density when replacing developer. (Automatic adjustment) | Image process (Photoconductor/ Developing) | |
4 | Used to display the operation data of the toner correction quantity. (Not used in the market.) | Process | |
26 | 1 | Used to set Yes/No of installation of the job separator. | Paper exit |
2 | Used to set the paper size of the paper feed tray. (When the paper size is changed, this simulation must be executed to change the paper size in software.) |
Paper feed | |
3 | Used to set the specifications of the auditor. (Setting must be made according to the auditor use conditions.) |
Auditor | |
5 | Used to set the count mode of the total counter and the maintenance counter. (A3/11x17 size) | ||
6 | Used to set the specifications (paper, fixed magnification ratio, etc.) of the destination. | ||
7 | Used to set the machine ID. | ||
8 | Counter mode setting (Long scale). | ||
10 | Used to set the trial mode of the network scanner. | ||
18 | Used to set Disable/Enable of the toner save mode operation. (For the Japan and the UK versions.) | ||
30 | Used to set the operation mode corresponding to the CE mark (Europe safety standards). (For slow start to drive the fusing heater lamp) | ||
32 | Used to set the special functions. | ||
35 | Used to set the display mode of SIM 22-4 trouble history when a same trouble occurred repeatedly. There are two display modes: display as one trouble and display as several series of troubles. | ||
38 | Used to set Continue/Stop of print when the maintenance life is reached. | ||
50 | Used to set functions. | ||
52 | Used to set whether non-printed paper (insertion paper, cover paper) is counted up or not. | ||
56 | Used to set ON/OFF of the Life Correction. | ||
65 | Used to set the finisher alarm mode. | ||
69 | Used to set the operating conditions for toner near end. | ||
73 | Enlargement continuous shoot, A3 wide copy mode image loss (shade delete quantity) adjustment | ||
74 | Used to set the OSA trial mode. | ||
78 | Used to set the password of the remote operation panel. | ||
79 | Used to set YES/NO of the pop-up display of user data delete result. | ||
27 | 1 | Used to set non-detection of communication error (U7-00) with RIC. (FSS function) | |
2 | Used to set the sender's registration number and the HOST server telephone number. (FSS function) | ||
4 | Used to set the initial call and toner order auto send. (FSS function) | ||
5 | Used to set the machine tag No. (This function allows the host computer to check the machine tag No.) (FSS function) | Communication (RIC/MODEM) | |
6 | Used to set of the manual service call. (FSS function) | ||
7 | Used to set of the enable, alert callout. (FSS function) | ||
9 | Used to set the paper transport time recording YES/NO threshold value and shading gain adjustment retry number. (FSS function) | ||
10 | Used to clear the trouble prediction history information. (FSS function) | ||
11 | Used to check the serial communication retry number and the scanner gain adjustment retry number history. (FSS function) | ||
13 | Used to check the history of paper transport time between sensors. (FSS function) | ||
14 | Used to set the FSS function connection test mode. | ||
15 | Used to display the FSS connection status. | ||
16 | Used to set the FSS alert send. | ||
17 | Used to set the FSS paper order alert. | ||
18 | Used to clear the FSS paper feed retry counter. | ||
30 | 1 | Used to check the operations of the sensors and the detectors in other than the paper feed section and the control circuits. | |
2 | Used to check the operations of the sensors and the detectors in the paper feed section and the control circuits. | ||
40 | 2 | Manual paper feed tray paper width sensor adjustment. | Paper feed |
7 | Used to set the adjustment value of the manual paper feed tray paper width sensor. | Paper feed | |
41 | 1 | Used to check the operations of the document size sensor and the control circuit. | |
2 | Used to adjust the document size sensor detection level. | ||
3 | Used to check the operations of the document size sensor and the control circuit. |