Sharp MXM1205
Simulation mode. List of simulation codes 26 - 43
Main | Sub | Function (Purpose) | Section | Purpose |
---|---|---|---|---|
26 | 10 | Used to set the trial mode of the network scanner. | Setting | |
18 | Used to set YES/NO of the toner save mode operation. (For Japan and UK versions.) | Setting | ||
30 | Used to set the CE mark support (Europe safety standards) operation mode. (Supporting slow start of the fusing heater lamp when driving it) | Setting | ||
32 | Used to set the specifications of the fusing cleaning operation. | Fusing | Setting | |
35 | Used to set the display type of troubles in Sim. 22-4. When two or more same troubles occur continuously, the trouble history is displayed as one trouble or as two or more troubles occurring continuously. | Setting | ||
38 | Used to set whether printing is terminated or not when the developer life is reached or when the fuser web end. | Setting | ||
41 | Used to set YES/NO of the magnification ratio auto select function (AMS) in the center binding mode. | Setting | ||
49 | Used to set the postcard copy speed mode. | Setting | ||
50 | Used to set Enable/Disable of black/white reverse function. | Setting | ||
52 | Used to set whether non-print paper (insertion, cover sheet) is counted or not. | Setting | ||
53 | User auto calibration (auto balance adjustment) Inhibit/Allow setting. | Setting | ||
65 | Used to set the finisher alarm mode. | Setting | ||
69 | Used to set the operating conditions for toner near end. | Setting | ||
71 | Used to set the trial mode of the web browsing function. | Setting | ||
73 | Enlargement continuous shoot, A3 wide copy mode image loss (shade delete quantity) adjustment | Setting | ||
74 | Used to set the OSA trial mode. | Setting | ||
78 | Used to set the password of the remote operation panel. | Setting | ||
79 | Used to set YES/NO of the pop-up display of user data delete result. | Setting | ||
27 | 1 | Used to set non-detection of communication error (U7-00) with RIC. (FSS function) | Setting | |
2 | Used to set the FSS function (user registration number, Host server telephone number). | Setting | ||
4 | Used to set the FSS function (initializing, call, toner order auto send). | Setting | ||
5 | Used to set the machine tag No. (This simulation allows to check the machine tag No. from the host computer side.) |
Communication (RIC/MODEM) | Setting | |
6 | Used to set of the manual service call. (FSS function) | Setting | ||
7 | Used to set the FSS function (enable, Alert calling) | Setting | ||
9 | Used to set the paper transport time recording YES/NO threshold value and shading gain adjustment retry number. (FSS function) | Setting | ||
10 | Used to clear the trouble prediction history information. (FSS function) | Data clear | ||
11 | Used to check the serial communication retry number and the scanner gain adjustment retry number history. (FSS function) | Others | ||
12 | Used to check the error history of high density, half-tone potential, and dark potential. | Other | ||
13 | Used to check the history of paper transport time between sensors. | Other | ||
14 | Used to set the FSS function connection test mode. | Setting | ||
15 | Used to display the FSS connection status. | Operation test/check | ||
16 | Used to set the FSS alert send. | Setting | ||
17 | Used to set the FSS paper order alert. | Setting | ||
18 | Used to clear the FSS paper feed retry counter. | Data clear | ||
30 | 1 | Used to check the operation of the sensors and the detectors in other than the paper feed section and the control circuits. | Operation test/check | |
2 | Used to check the operation of the sensors and the detectors in the paper feed section and the control circuits. | Operation test/check | ||
10 | Used to check the operations of the Main unit double feed sensor. | Must not be used unless a special change is required. | ||
40 | 2 | Used to adjust the detection level of the manual paper feed tray paper width detector. | Paper feed | Adjustment/Setting |
7 | Used to adjust the manual paper feed tray size width detection level. | Paper feed | Adjustment/Setting | |
12 | Used to adjust the tray 4 width detection level. | Paper feed | Adjustment/Setting | |
41 | 1 | Used to check the operation of the document size sensor and the control circuit. | Operation test/check | |
2 | Used to adjust the document size sensor detection level. | Adjustment | ||
3 | Used to check the operation of the document size sensor and the control circuit. | Operation test/check | ||
43 | 1 | Used to set the fusing temperature in each mode. | Setting | |
2 | Used to set the fusing operation and preheating. | Setting | ||
20 | Used to set the environmental correction under low temperature and low humidity (L/L) for the fusing temperature setting (SIM 43-1) in each paper mode. | Adjustment/Setup | ||
21 | Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-1) in each paper mode. | Adjustment/Setup | ||
24 | Used to set the correction of the temperature adjustment value of SIM 43-1. | Adjustment/Setup | ||
31 | Used to check the operation of the fusing web cleaning motor and the control circuit. | Operation test/check | ||
32 | Used to set the forcible operation of the fusing web cleaning when job end. | Adjustment/Setting |