Sharp MXC400P
Simulation mode. 1 Entering
General
The simulation mode has the following functions, to display the machine operating status, identify the trouble position and causes in an earlier stage, and make various setups and adjustments speedily for improving the serviceability of the machine.
- Various adjustments
- Setting of the specifications and functions
- Canceling troubles
- Operation check
- Counters check, setting, clear
- Machine operating conditions (operation hysteresis), data check, clear.
- Various (adjustments, setting, operation, counters, etc.) data transport.
Entering the simulation mode
Enter the simulation mode by the following key operations.
[STOP] key ON → [LOGOUT] key ON → [BACK] key ON → [LOGOUT] key ON → (Ready for input of a main code of simulation)
When [STOP] key is pressed, the simulation mode is canceled and the machine returns to the normal mode.
Note for the simulation mode
Do not turn OFF the power switch on the operation panel when the machine is in the simulation mode.
If the power switch should be turned OFF in the simulation mode, a malfunction may be resulted. In this case, turn OFF/ON the main power source.