Sharp MX7500N
Simulation mode. List of simulation codes 46 - 51
Main | Sub | Functions | Section |
---|---|---|---|
46 | 1 | Used to adjust the copy density in the copy mode. | |
2 | Used to adjust the copy density in the copy mode. | ||
4 | Used to adjust the density in the image send mode. | ||
5 | Used to adjust the density in the image send mode. | ||
8 | Used to adjust the image send mode color balance RGB. | ||
9 | Used to adjust the scan image density. | ||
10 | Used to adjust the copy color balance and the gamma (for each color copy mode). | ||
16 | Used to adjust the monochrome copy density and the gamma (for each monochrome copy mode). | ||
19 | Used to set the operating conditions for the density scanning (exposure) of monochrome auto copy mode documents. | ||
21 | Copy color balance adjustment (Manual adjustment) | ||
23 | Used to set the density correction of copy high density section (High density tone gap supported). | ||
24 | Copy color balance adjustment (Auto adjustment) | ||
25 | Used to adjust the copy color balance. (Single color copy mode) | ||
26 | Used to reset the single color mode color balance set value to the default. | ||
27 | Used to adjust the gamma/density of copy images, texts, and line image edges. | ||
30 | Used to adjust the resolution in the sub scanning direction in the copy mode. | ||
32 | Used to adjust the document background density reproducibility in the monochrome auto copy mode. | ||
36 | Used to adjust the colors in the 2-color copy mode. | ||
37 | Used to adjust the reproduction capability of monochrome mode color. | ||
38 | Used to adjust the black component amount in the color copy mode. | ||
47 | Used to set the compression rate of copy and scan images (JPEG). | ||
48 | Copy output resolution setting | ||
51 | Used to adjust the gamma for the copy mode heavy paper mode and the image process mode. | ||
52 | Used to set the gamma default for the copy mode heavy paper and the image process mode. (After execution of either SIM46-54 or SIM46-51, the adjustment value is reset to the initial value.) |
||
54 | Used to perform the engine halftone automatic density adjustment (dither). | ||
55 | Used to adjust the drop out color in the image send mode (monochrome manual text mode). | ||
58 | Used to set the copy mode pseudo resolution. (Smoothing process) | ||
59 | Used to perform the copy mode pseudo resolution image process adjustment. | ||
60 | Used to adjust the sharpness in the color auto copy mode. | ||
61 | Used to adjust the area separation recognition level. | ||
62 | Used to set the operating conditions of the ACS, the area separation, the background image process, and the auto exposure mode. | ||
63 | Used to adjust the density in the copy low density section. | ||
65 | Used to set the color correction table. | ||
66 | Used to adjust the reproduction capability of watermarks in the copy/printer mode. | ||
74 | Copy color balance adjustment (Auto adjustment)/Printer color balance adjustment (Auto adjustment) | ||
90 | Used to set the process operation of high-compression PDF images. | ||
91 | Used to adjust the reproduction capability of black text. | ||
48 | 1 | Used to adjust the scan image magnification ratio (in the main scanning direction and the sub scanning direction). | |
5 | Used to correction the scan image magnification ratio (in the sub scanning direction). | Scanner section | |
6 | Used to adjust the rotation speed of each motor. | ||
49 | 1 | Used to perform the firmware update. | |
3 | Used to update the operation manual in the HDD. | ||
5 | Used to perform the watermark update. | ||
10 | Used to perform ACU update. | ||
50 | 1 | Copy image position, image loss adjustment | |
2 | Used to adjust the copy image position and the image loss. (This simulation is a simplified version of SIM 50-1). |
||
5 | Used to adjust the print lead edge image position. (PRINTER MODE) | ||
6 | Used to adjust the copy image position and the image loss. (DSPF mode) | DSPF | |
7 | Used to adjust the copy image position and the image loss (DSPF mode). (This simulation is a simplified version of SIM 50-6.) |
DSPF | |
10 | Used to adjust the black print image magnification ratio and the off-center position. (The adjustment is made separately for each paper feed section.) |
||
12 | Used to perform the scan image off-center position adjustment. (The adjustment is made separately for each scan mode.) |
||
20 | Image registration adjustment (Main scanning direction) | ||
22 | Used to adjust the image registration. (Main scan direction, sub scan direction) (Auto adjustment)/OPC drum phase adjustment (Auto adjustment) | ||
24 | Used to display the detail data of SIM 44-2, 50-20 and 22. | ||
27 | Used to perform the image loss adjustment of scanned images in the FAX or image send mode. | ||
28 | Used to automatically adjust the image loss, void area, image off-center, and image magnification ratio. | ||
51 | 1 | Used to adjust the ON/OFF timing of the secondary transport voltage. | |
2 | Used to adjust the contact pressure (deflection amount) on paper by the main unit and the DSPF registration roller. (This adjustment is performed when there is a considerable variation in the print image position on the paper or when paper jams frequently occur.) |