| Main |
Sub |
Functions |
Section |
| 26 |
71 |
Used to set the trial mode of the web browsing function. |
|
| 73 |
Enlargement continuous shoot, A3 wide copy mode image loss (shade delete quantity) adjustment |
|
| 74 |
Used to set the OSA trial mode. |
|
| 78 |
Used to set the password of the remote operation panel. |
|
| 79 |
Used to set YES/NO of the pop-up display of user data delete result. |
|
| 27 |
1 |
Used to set non-detection of communication error (U7-00) with RIC. (FSS function) |
|
| 2 |
Used to set the sender's registration number and the HOST server telephone number. (FSS function) |
|
| 4 |
Used to set the initial call and toner order auto send. (FSS function) |
|
| 5 |
Used to set the machine tag No. (This function allows the host computer to check the machine tag No.) (FSS function) |
Communication (RIC/MODEM) |
| 6 |
Used to set of the manual service call. (FSS function) |
|
| 7 |
Used to set of the enable, alert callout. (FSS function) |
|
| 9 |
Used to set the paper transport time recording YES/NO threshold value and shading gain adjustment retry number. (FSS function) |
|
| 10 |
Used to clear the trouble prediction history information. (FSS function) |
|
| 11 |
Used to check the serial communication retry number and the scanner gain adjustment retry number history. (FSS function) |
|
| 12 |
Used to check the high density, halftone process control and the automatic registration adjustment error history. (FSS Function) |
|
| 13 |
Used to check the history of paper transport time between sensors. (FSS function) |
|
| 14 |
Used to set the FSS function connection test mode. |
|
| 15 |
Used to display the FSS connection status. |
|
| 16 |
Used to set the FSS alert send. |
|
| 17 |
Used to set the FSS paper order alert. |
|
| 18 |
Used to clear the FSS paper feed retry counter. |
|
| 30 |
1 |
Used to check the operations of the sensors and the detectors in other than the paper feed section and the control circuits. |
|
| 2 |
Used to check the operations of the sensors and the detectors in the paper feed section and the control circuits. |
|
| 10 |
Used to check the operations of the Main unit double feed sensor. |
|
| 40 |
2 |
Manual paper feed tray paperwidth sensor adjustment. |
Paper feed |
| 7 |
Used to set the adjustment value of the manual paper feed tray paper width sensor. |
Paper feed |
| 12 |
Used to adjust the tray 4 width detection level. |
Paper feed |
| 41 |
1 |
Used to check the operations of the document size sensor and the control circuit. |
|
| 2 |
Used to adjust the document size sensor detection level. |
|
| 3 |
Used to check the operations of the document size sensor and the control circuit. |
|
| 43 |
1 |
Used to set the fusing temperature in each mode. |
|
| 2 |
Used to set the fusing operation and preheating. |
|
| 20 |
Used to set the environmental correction under low temperature and low humidity (L/L) for the fusing temperature setting (SIM 43-1) in each paper mode. |
|
| 21 |
Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-1) in each paper mode. |
|
| 24 |
Used to set the correction of the temperature adjustment value of SIM 43-1. |
|
| 32 |
Used to set various items related to the forcible operation of web cleaning when job end. |
Fusing |
| 34 |
Used to check the fusing lower web cleaning motor operation. |
Fusing |
| 35 |
Fusing nip operation check |
Fusing |
| 44 |
1 |
Used to set each correction operation function in the image forming (process) section. |
Image process (Photoconductor/ Developing/Transfer/Cleaning) |
| 2 |
Used to adjust the sensitivity of the image density sensor (registration sensor). |
Process |
| 4 |
Used to set the conditions of the high density process control operation. |
Process |
| 6 |
Used to execute the high density process control forcibly. |
Process |
| 9 |
Used to display the result data of the high density process control operation. |
Image process (Photoconductor/ Developing/Transfer/Cleaning) |
| 12 |
Used to display the operation data of the high density process control and the image density sensor |
Image process (Photoconductor/ |
| |
(registration sensor). |
Developing) |
| 14 |
Used to display the output level of the temperature and humidity sensor. |
Process (OPC drum, development)/ Fusing/LSU |
| 15 |
Used to set the OPC drum idle rotation. |
Process |
| 17 |
Process refresh execution |
Process |
| 21 |
Used to set the halftone process control target. |
Process |
| 22 |
Used to display the toner patch density level in the halftone process control operation. |
Process |
| 24 |
Used to display the correction target and the correction level in the halftone process control operation. |
Process |
| 25 |
Used to set the calculating conditions of the correction value for the halftone process control. |
Process |
| 26 |
Used to execute the halftone process control compulsory. |
Process |
| 27 |
Used to clear the correction data of the halftone process control. |
Process |
| 28 |
Used to set the process control execution conditions. |
Process |
| 29 |
Used to set the operating conditions of the process control during a job. |
Process |
| 31 |
Used to check the deflection of the OPC drum. |
Process |
| 37 |
Used to set the development bias correction level in the continuous printing operation. |
|
| 43 |
Used to display the identification information of the developing unit. |
Developing system |
| 62 |
Used to set the process control execution conditions. |
Process |