Sharp MX6580N
Troubleshooting. Jam code list. Main unit 3
| JAM code | JAM content |
|---|---|
| PPD2_NA_D | PPD2 not-reached JAM (ADU refeed paper) (Delay of paper just before the jam from PS) *2 |
| PPD2_SM_D | PPD2 remaining JAM (manual paper feed tray paper) (Delay of paper just before the jam from PS) *2 |
| PPD2_S1_D | PPD2 remaining JAM (tandem tray 1 paper feed paper) (Delay of paper just before the jam from PS)*2 |
| PPD2_S2_D | PPD2 remaining JAM (tandem tray 2 paper feed paper) (Delay of paper just before the jam from PS)*2 |
| PPD2_S3_D | PPD2 remaining JAM (cassette 3 paper feed paper) (Delay of paper just before the jam from PS) *2 |
| PPD2_S4_D | PPD2 remaining JAM (cassette 4 paper feed paper) (Delay of paper just before the jam from PS) *2 |
| PPD2_SL_D | PPD2 remaining JAM (side A4/A3LCC paper feed paper) (Delay of paper just before the jam from PS) *2 |
| PPD2_SL11_D | PPD2 remaining JAM (large capacity paper feed tray 1 paper feed paper) (Delay of paper just before the jam from PS) *2 |
| PPD2_SL12_D | PPD2 remaining JAM (large capacity paper feed tray 2 paper feed paper) (Delay of paper just before the jam from PS) *2 |
| PPD2_SLM_D | PPD2 remaining JAM (large capacity paper feed tray manual paper feed paper) (Delay of paper just before the jam from PS) *2 |
| PPD2_SA_D | PPD2 remaining JAM (ADU refeed paper) (Delay of paper just before the jam from PS) *2 |
| P FPFD NM | FPFD not-reached JAM (manual paper feed tray paper) |
| P_FPFD_N1 | FPFD not-reached JAM (tandem tray 1 paper feed paper) |
| P_FPFD_N2 | FPFD not-reached JAM (tandem tray 2 paper feed paper) |
| P FPFD N3 | FPFD not-reached JAM (tray 3 paper feed paper) |
| P_FPFD_N4 | FPFD not-reached JAM (tray 4 paper feed paper) |
| P_FPFD_NL | FPFD not-reached JAM (side A4/A3LCC paper feed paper) |
| P_FPFD_NL11 | FPFD not-reached JAM (large capacity paper feed tray 1 paper feed paper) |
| P_FPFD_NL12 | FPFD not-reached JAM (large capacity paper feed tray 2 paper feed paper) |
| P_FPFD_NLM | FPFD not-reached JAM (large capacity manual paper feed paper) |
| P_FPFD_NA | FPFD not-reached JAM (ADU refeed paper) |
| P FPFD SM | FPFD remaining JAM (manual paper feed tray paper) |
| P FPFD S1 | FPFD remaining JAM (tandem tray 1 paper feed paper) |
| P_FPFD_S2 | FPFD remaining JAM (tandem tray 2 paper feed paper) |
| P FPFD S3 | FPFD remaining JAM (tray 3 paper feed paper) |
| P FPFD S4 | FPFD remaining JAM (tray 4 paper feed paper) |
| P_FPFD_SL | FPFD remaining JAM (side A4/A3LCC paper feed paper) |
| P_FPFD_SL11 | FPFD remaining JAM (large capacity paper feed tray 1 paper feed paper) |
| P_FPFD_SL12 | FPFD remaining JAM (large capacity paper feed tray 2 paper feed paper) |
| P_FPFD_SLM | FPFD remaining JAM (large capacity manual paper feed paper) |
| P FPFD SA | FPFD remaining JAM (ADU refeed paper) |
| POD1_NA | POD1 not-reached JAM (In the case of a jam at the second surface) |
| POD1_N | POD1 not-reached JAM |
| POD1_SA | POD1 remaining JAM (In the case of a jam at the second surface) |
| POD1 S | POD1 remaining JAM |
| POD2_NB | POD2 not-reached JAM (In the case of a jam before switchback) |
| POD2_SB | POD2 remaining JAM (In the case of a jam before switchback) |
| POD2_SA | POD2 remaining JAM (In the case of a jam after switchback) |
| POD3 N | POD3 not-reached JAM |
| POD3_S | POD3 remaining JAM |
| APPD1_N | APPD1 not-reached JAM |
| APPD1 S | APPD1 remaining JAM |
| APPD2 N | APPD2 not-reached JAM |
| APPD2_S | APPD2 remaining JAM |
| MTR ILG | Motor driver trouble JAM |
| DRUM | Drum JAM (drum lock detection) |
| FUSER | Fuser JAM (fusing winding detection) |
| PRI JAM | PRI JAM (Image preparation wait time-out) |
| LCC_ERR | LCC JAM (LCC communication abnormality detection) |
| FIN_ERR | Finisher JAM (Finisher communication abnormality detection) |
| SIZE ILG | Size illegal JAM |
| STOP_JAM | Emergency stop request JAM (Controller request) |
| NO_MATCH | Parameter inconsistency |
| MFT RT | Manual feed tray paper feed JAM (Check the paper) |
| TRAY1 RT | Tray 1 feed tray paper feed JAM (Check the paper) |
| TRAY2_RT | Tray 2 feed tray paper feed JAM (Check the paper) |
| TRAY3_RT | Tray 3 feed tray paper feed JAM (Check the paper) |
| TRAY4_RT | Tray 4 feed tray paper feed JAM (Check the paper) |
| MFT_1ST | Manual feed tray paper feed JAM (Check the paper set condition) |
| TRAY1_1ST | Tray 1 feed tray paper feed JAM (Check the paper set condition) |
| TRAY2_1ST | Tray 2 feed tray paper feed JAM (Check the paper set condition) |
| TRAY3_1ST | Tray 3 feed tray paper feed JAM (Check the paper set condition) |
| TRAY4_1ST | Tray 4 feed tray paper feed JAM (Check the paper set condition) |
*1: In SIM22-41, the descriptions are abbreviated on the screen because of the limitation on the number of characters (100K for the paper feed counter).
*2: In SIM22-41, the description of "(Delay of paper just before the JAM from PS)" is omitted because of the limitation on the number of characters.