Sharp MX4060N
Simulation mode. List of Classic mode. Codes 51-1 - 62-20
Sim No. | Installation | Maintenance | Adjustment and Settings | |
---|---|---|---|---|
51-1 | Used to adjust the ON/OFF timing of the secondary transport voltage | |||
51-2 | Used to adjust the contact pressure (deflection amount) on paper by the main unit and the SPF resist roller | |||
53-6 | Used to adjust the detection level of the SPF document width | 3 | ||
53-7 | Used to adjust the SPF document size width sensor | |||
53-8 | Used to adjust the document lead edge reference and the SPF mode document scan position | 3 | ||
53-9 | SPF dirt detection setting | |||
53-10 | SPF dirt detection execution | |||
55-1 | Used to set the specification of the engine control operations (SOFT SW) | |||
55-2 | Used to set the specifications of the scanner control operation (SOFT SW) | |||
55-3 | Used to set the specifications of the controller operation (SOFT SW) | |||
55-10 | Used to set the special stamp text for Taiwan | |||
56-1 | Used to transport data between HDD - MFP PWB SRAM/EEPROM | |||
56-2 | Used to backup the data in the EEPROM and HDD to the USB memory | |||
56-3 | Used to backup the document filing data to the USB memory | |||
56-4 | Used to backup the JOB log data to the USB memory | |||
56-5 | Used to import the SIM22-6 data to a USB memory in the text format | |||
56-6 | Used to output the JAM/trouble data | |||
56-7 | Used to export system log data to the USB memory | |||
56-8 | Used to perform ICC profile update | |||
56-15 | MFP EEPROM data restore | |||
56-99 | Used to export system log data to the USB memory | 3-4 | 1-5 | 9-4 |
60-1 | Used to check the memory operations (read/ write) of the SCU-MFP PWB | |||
61-1 | Used to check the LSU polygon motor rotation and laser detection | |||
61-3 | Used to set the laser power | |||
61-4 | Used to print the print image skew adjustment pattern | |||
61-11 | Used to correct the laser power automatically | 2-3 | 1-2 -3 |
|
61-12 | Laser power manual correction | |||
61-13 | Used to clear the laser power correction value | 2-3 | 1-3 | |
61-14 | Used to set the laser power correction | 1-3 | ||
62-1 | Used to format the HDD | |||
62-2 | Used to check read/write of the HDD (partial) | |||
62-3 | Used to check read/write of the HDD (all areas) | |||
62-6 | Used to perform the self diagnostics of the HDD |
|||
62-7 | Used to print the HDD self diagnostics error log | |||
62-8 | Used to format the HDD | |||
62-10 | Used to clear the job completion list data | |||
62-11 | Used to delete the document filing data | |||
62-12 | Used to set Enable/Disable of auto format in a HDD trouble |
|||
62-13 | Used to format the HDD (Operation manual watermark data only) | |||
62-14 | Used to delete the document filing management data | |||
62-20 | Used to check the status display of HDD |