Samsung SLC3060ND
Service Mode. Service Functions Menu. SFE
• Service Functions > SFE
Special Feature Enablement (SFE) means to provide the configurable options (On/Off) in service mode for technicians or dealers to satisfy the requirements from B2B sites easily without changing the firmware installed in a device.
SFE Code |
Description |
---|---|
001 | In case of printing in directional media (Letterhead/Preprinted/Punched), the device prints as the same output direction regardless of simplex or duplex. |
002 | The device always prints output as mono about PC printing. |
007 | The device prints as original 1 dot line without 2 dot line compensation. |
008 | The device ignores paper size command in PRN and prints as paper size in tray. |
009 | PJL readback response is changed with HPOS.
|
010 | Maximum value of 'Power save time' is increased as 240 min. |
012 | If the device is in jam status, all print jobs except secure or stored jobs are deleted automatically. |
013 | The device ignores the USB memory stick and detects only card reader. |
014 | When the authenticated user uses scan to email, user's email address is added automatically. |
019 | User ID is not case-sensitive for login |
024 | The device executes copy job as only mono even though color copy is started. |
032 | If this SFE option is enabled, the image processor shall not omit line that is less than 1 dot. By PCL 6 command rule, the device shall not print less than 1 dot line. But this SFE is enabled, the device shall print it. |
033 | If this SFE option is enabled, the image processor shall draw Letter Gothic font as previous thickness(Bitstream) thicker than URW++. |
035 | The device shall provide auto scale for A3/Leger to A4/Letter in case of A4 Models that doesn't support A3/Ledger size. |
037 | The device shall permit or ignore host printing job by permit key PJL command from solution such as IPRINT. |