Samsung SCX6545NX
Diagnostics Mode. Test Routines Tab. Engine/DADF Test Routines 1
• Diagnostics>Test Routines>Copier>Engine/DADF Test Routines.
When exit this window, OP shall send exit command. (CMD_COPY_COMP_EXITMODE)
By default, all Test routines will be displayed.
By default, search edit box has 00 .
OK/Reset button shall be disabled until any test routine is selected.
Maximum number of selection is 3.
Reset will deselect all selected test routines.
User select test routine by touching the row and deselect touching it again.
User input chain number in search edit box and only all test routines in the chain shall be displayed.
By default, Start/Stop/Stop All shall be disabled.
Start button shall be enabled when selected item is not running.
Multiple selection shall not be supported.
Stop shall be enabled only when the selected item is running.
Stop All shall be enabled when there is any running test item.
Back button shall be disable when there is any running test item.
Copier Test Routines Table
1) Cover
| Code | Displayed Name | Meaning | State Displayed |
|---|---|---|---|
| 01-100 | Side Cover Interlock | Detect if the Front Cover/Side Cover is open or closed. | Opened[Closed] |
| 01-200 | Exit Cover Present Sensor | Detect when Exit Cover is in place. | Install[Not Install] |
2) Motor
| Code | Displayed Name | Meaning | State Displayed |
|---|---|---|---|
| 04-100 | Main BLDC Motor | Main BLDC Motor On/Off | On[Off] |
| 04-110 | Main BLDC Motor Ready | Detects if Main BLDC motor runs at normal speed. | High[Low] |
| 04-200 | Exit Motor Forward Fast | Exit Motor Forward Fast On/Off | On[Off] |
| 04-210 | Exit Motor Forward Slow | Exit Motor Forward Slow On/Off | On[Off] |
| 04-300 | Duplex Motor Forward | Duplex Motor Forward On/Off | On[Off] |
| 04-310 | Duplex Motor Backward | Duplex Motor Backward On/Off | On[Off] |
| 04-400 | Duplex Fan1,2 Run | Start/Stop Duplex Fan1,2 run | On[Off] |
| 04-410 | Duplex Fan1 Run Ready | Detects if Duplex Fan1 runs at normal speed. | High[Low] |
| 04-510 | T1 Elevating Motor | T1 Elevate Motor On/Off | On[Off] |
| 04-520 | T2 Elevating Motor | T2 Elevate Motor On/Off (Optional) | On[Off] |
| 04-530 | T3 Elevating Motor | T3 Elevate Motor On/Off (Optional) | On[Off] |
| 04-540 | T4 Elevating Motor | T4 Elevate Motor On/Off (Optional) | On[Off] |