Samsung SCX6545N-XBH
Diagnostics Mode. Test Routines Tab. NVM Read/Write 1
• Diagnostics>Test Routines>Copier>NVM Read/Write
“Edit” button shall be disabled until any NVM item is selected.
“Edit” button shall be disabled when read only NVM is selected. Search edit box has 00-000 as a default. User shall input the whole number to find a specific NVM by pressing Find button. (Refer to NVM Read/Write table) If matching NVM is found, the page including the specified NVM shall be displayed and the NVM is shown as selected. If matching NVM is not found, error message such as “Invalid NVM number” shall be displayed on the status area and search edit box displays default number.
• Diagnostics>Test Routines>Copier>NVM Read/Write>Edit
Copier NVM Read/Write
1) Fuser
| Code | NVM Description | Meaning | Component | Default | Maximum / Minimum |
|---|---|---|---|---|---|
| 10-100 | StandBy Temperature offset | Target Temperature during standby mode. | Engine | 10 | 0 ~ 15 (4 steps / 5 degrees interval) |
| 10-105 | Run Temperature offset | Target Temperature during run mode. | Engine | 5 | 0 ~ 10 (3 steps / 5 degrees interval) |
| 10-110 | Low Power Temperature offset | Target Temperature during Power save mode. | Engine | 20 | 0 ~ 40 (9 steps / 5 degrees interval) |
| 10-115 | 101-185 mm Temperature offset |
Offset temperature required on thermistor B for paper width. | Engine | 5 | 0 ~ 15 (4 steps / 5 degrees interval) |
| 10-120 | 186-216 mm Temperature offset |
Offset temperature required on thermistor B for paper width. | Engine | 5 | 0 ~ 15 (4 steps / 5 degrees interval) |
| 10-125 | 60 gms Temperature offset | Media type offset for fuser roll temperature. | Engine | 5 | 0 ~ 15 (4 steps / 5 degrees interval) |
| 10-130 | 90 gms Temperature offset | Media type offset for fuser roll temperature. | Engine | 5 | 0 ~ 10 (3 steps / 5 degrees interval) |
| 10-135 | Bond Temperature offset | Media type offset for fuser roll temperature. | Engine | 5 | 0 ~ 10 (3 steps / 5 degrees interval) |
| 10-140 | Transparency Temperature offset | Media type offset for fuser roll temperature. | Engine | 5 | 0 ~ 10 (3 steps / 5 degrees interval) |
| 10-145 | Cardstock Temperature offset | Media type offset for fuser roll temperature. | Engine | 5 | 0 ~ 10 (3 steps / 5 degrees interval) |
| 10-150 | Envelopes Temperature offset | Media type offset for fuser roll temperature. | Engine | 5 | 0 ~ 10 (3 steps / 5 degrees interval) |
| 10-155 | Labels Temperature offset | Media type offset for fuser roll temperature. | Engine | 5 | 0 ~ 10 (3 steps / 5 degrees interval) |
| 10-200 | Fuser Life Page Counter | [Read Only]Total fuser page count | Engine | 0 | Read Only |
| 10-210 | Heat Roll Life Page Counter | [Read Only]Heat roll page count | Engine | 0 | Read Only |
| 10-220 | Pressure Roll Life Page Counter | [Read Only]Pressure roll page count | Engine | 0 | Read Only |
| 10-300 | Pick-up interval delay | Change time interval for paper pick-up | Engine | 0 | 0 ~ 100 ( * 100 msec ) |
| 10-310 | Pick-up interval delay [Special paper] | Change time interval for paper pick-up | Engine | 0 | 0 ~ 100 ( * 100 msec ) |
| 117-0001 | Print CTD Check Page | Print CTD Check Page |