Samsung SCX6545N-XBH

Introduction

This document will capture the behavior specifications for the GUI Windows for Diagnostics. Each section of this document describes one feature with a step window image and script. However, used window image is not fixed image from the specification point of view. Acquire detail information from script. Window image is just example image will be implemented.

How to enter diagnostics mode

1. Press 3*4 key(1, 2, 3) simultaneously.
2. Enter password(1934).
3. Press ‘OK’ button.

How to exit diagnostics mode

By pressing the Home button, exit Diagnostics mode.
When exit Diagnostics mode, a popup window shall display.
By default, Reset Counters is No, Reboot Copier is Yes.

Diagnostics Menu Map

Information

• General
  • Machine Serial number
  • Network IP Address
  • Images since last call
  • Service started
• HFSI
• Software version
• Usage Counters

Fault History

• Fault Log
• Fault Counters

Test Rountines

• Copier
  • NVM Read/Write
  • NVM Initialization
  • Engine/DADF Routines
• Fax
  • NVM Read/Write
  • NVM Initialization
  • Fax Routines
  • Protocol Report
• Network
  • NVM Initialization
• Other
  • Print Test Pattern
  • Shading Test
  • Scan Edge Test
  • Memory Clear
  • Print Report
  • Reset Admin Password