Samsung ProXpress C3060FW

• Service Functions > Memory Clear (or Clear All Mem.)

The function resets the system to factory default settings. This function is used to reset the system to the initial value when the product is functioning abnormally . All the values are returned to the default values, and all the information, which was set by the user, will be erased.
NOTE
Always perform a memory clear after replacing the main board. Otherwise, the system may not operate properly.

• Service Functions > Clear Admin Password (or Clear Admin PW)

This menu resets the Admin password.

• Service Functions > Format Mass Storage > Device

This menu executes SD card format.

• Service Functions > Engine Footer

This function is for monitoring of the engine status. If you perform this function, at printing, the setting value for engine is shown on the bottom of the printed page.

• Service Functions > Part Replacement Alert > Toner

This function is to set up whether or not to show the toner replacement alert.

• Service Functions > Brower Setting

This menu provides the function to configure below items for development purpose.

• XSS Auditing : configures whether to allow cross site scripting capability or not (Disable / Enable). Default is "Disable"
• Java Script Error : configures whether to display java script error at browser. Default is "Off"
  - Off : No display about errors
  - Icon : When there is an error, it just shall be displayed as an icon at upper right corner. When browser move to other page, icon shall be disappeared.
  - Dialog : When there is an error, browser shall pop up window with errors. Once user press OK. dialog shall be closed.
• Log Level : displays Log Level (Error, Info, Debug) of Web browser for debug purpose, default is "Error"
• Java Script PopUp : configures whether to support javascript Popup (alert,confirm,prompt). Default is "Disable".
• Reset : resets values to their default. ( Xss Auditing, Java Script Error, Log Level, Java Script Popup )

• Service Functions > Capture Log

This function copies all the saved log in the system to a UBS memory as a zip file. Note that the size of system log could reach up to 1GB. If the system log size become considerably huge, it will take longer time to copy to the plugged memory.

• Service Functions >UI Log Level

This menu is to check the UI debug message for development.