Riso SF9490
Test Mode. List of Test Modes 0132 - 0151
No. | Name | Description | Setting |
---|---|---|---|
0132 | Program File Info. Display | [Program file information]
|
- |
0135 | Paper Size ID Display | Displays the paper ID identified based on the information from the paper width potentiometer and the paper size detection sensor. The IDs indicate the following: 00: No paper 01: A3 02: B4 03: A4 04: A4 landscape 05: B5 06: B5 landscape 07: A5 09: B6 11: Post card 50: Unknown 1 (The paper size detection sensor is ON) 51: Unknown 2 (The paper size detection sensor is OFF) |
|
0137 | Maintenance Count (Master Making) | Displays the value of the maintenance counter (master making). The displayed value "1" means 1000. * For example, the seven-segment display shows "1234" for 1,234,000. |
- |
0138 | Maintenance Count (Printing) | Displays the value of the maintenance counter (printing). The displayed value "1" means 1000. * For example, the seven-segment display shows "1234" for 1,234,000. |
- |
0139 | Maintenance-Drum Meter Display |
Displays the value of the maintenance counter (print drum). The displayed value "1" means 1000. * For example, the seven-segment display shows "1234" for 1,234,000. |
- |
0140 | Scan/Master-Making Independent Mode | Specifies whether the scanning action and the master removal action are executed in series or in parallel. | Setting value: 0: In parallel <default> 1: In series |
0141 | Counter Display Control | Specifies whether to display the counter display. | Setting value: 0: Not display 1: Display <default> |
0143 | Maintenance-Master Count Entry |
Sets the number of masters ( = MC) that triggers the maintenance-call message. | Setting range: 0 to 999900 masters (The entered value must be 0 to 9999.) Unit: 1 (The value of 1 means 100 masters.) Default: 0 (0 master: The maintenance call is not triggered.) |
0144 | Maintenance-Copy Count Entry | Sets the number of prints on the machine ( = TC) that triggers the maintenance-call message. |
Setting range: 0 to 9999000 prints (The entered value must be 0 to 9999.) Unit: 1 (The value of 1 means 1000 prints.) Default: 0 (0 print: The maintenance call is not triggered.) |
0145 | Maintenance-Drum Meter Entry |
Sets the number of print-drum prints that triggers the maintenance-call message. | Setting range: 0 to 9999000 prints (The entered value must be 0 to 9999.) Unit: 1 (The value of 1 means 1000 prints.) Default: 0 (0 print: The maintenance call is not triggered.) |
0146 | Scan First | Prevents machine vibration caused by the master removal action from affecting the scanning quality. By default, the scanning action and the master removal action start at the same time. When this test mode is enabled, firstly the scanning action starts and then the master removal and master making actions start after the scanning action is completed. | Setting value: 0: Disabled <default> 1: Enabled |
0149 | Authentication Enable/ Disable Selection |
Enables/Disables authentication.
|
Setting value 0: Authentication disabled 1: Authentication enabled <default> |
0150 | Print Quantity Repeat Setting |
Sets whether to retain the last count when the Auto Process function is OFF. | Setting value 0: Do not retain <default> 1: Retain |
0151 | Print after Short Interval | Sets whether to enable gradual print speed acceleration after a short interval between printing jobs. | Setting value: 0: Disable gradual print speed acceleration <default for Japan> 1: Enable gradual print speed acceleration <default for overseas> |