Riso SF9390
Test Mode. List of Test Modes 0173 - 0281
| No. | Name | Description | Setting |
|---|---|---|---|
| 0173 | Clock Setting (HOUR & MINUTE) | Sets the hour and minute parts of the date in the RTC. * When this test starts, the hour and minute of the current RTC date appear on the seven-segment display. For example, "1845" appears for 18:45. * Test Mode No.0101 (Clock Adjustment Confirm) must be run after values are set in Test Modes No.0171 - No.0173. Test Mode No.0101 applies values set in Test Modes No.0171 - No.0173 to the RTC. |
Setting range: First two digits: 0 to 23 (hour) Last two digits: 0 to 59 (minute) Unit: 1 Default: 0000 when the RTC has not yet been set (before No.0101 runs) The RTC value at the start of the test when the RTC has already been set (after No.0101 runs) |
| 0181 | Service Info. File Mail Control |
Enables/Disables the maintenance information to be sent via email. [Sending maintenance information via email] The Maintenance Information email button appears in Functions when this test mode is set to be enabled. |
Setting value: 0: Disabled <default> 1: Enabled |
| 0182 | Counter/Stock Info. Mail Control |
Enables/Disables the stock management information to be sent via email. [Sending stock management information via email] The Counter/Stock Info. email setting button appears in Properties when this test mode is set to be enabled. |
Setting value: 0: Disabled <default> 1: Enabled |
| 0183 | Counter Report Enable Control |
Specifies whether to display "Counter Report" in Custom Setting Mode or Functions. | Setting value: 0: Not display <default> 1: Display |
| 0184 | Counter Report Reminder Date Setting | Sets the date when to display a reminder for the counter report. | Setting range: 0 to 31 Unit: 1 Setting value: 0: No reminder is displayed. <default> 1 to 31: A reminder is displayed on the specified date. * The reminder date is replaced with the last day of the month when the specified date is 29, 30, or 31 and the date does not exist in the month. |
| 0185 | Counter Report Mail Enable Control |
Enables/Disables the ID counter report and counter report to be sent via email. When the ID counter report is enabled to be sent via email, the email button appears on the ID Counter Report window in Functions. [Sending the counter report via email] When this test mode set to "1" and Test Mode No.0183 is set to "1", the email button appears on the Counter Report window in Functions. |
Setting value: 0: Disabled <default> 1: Enabled |
| 0186 | Private MIB Enable Control | Enables/Disables RISO Private MIB. | Setting value: 0: Disabled 1: Enabled <default> |
| 0187 | Job Spool Setting | Specifies whether to spool or discard DtoP jobs (LAN/USB) when the RISOGRAPH cannot receive the jobs. [When this is set to 0 (jobs are spooled)] Jobs are spooled (not discarded) even when the RISOGRAPH cannot receive the jobs. That is, jobs sent from the PC never disappear. However, a sent job may time out on the PC when the RISOGRAPH cannot receive jobs for a long time. In such a case, the print image can be partially missed even though the RISOGRAPH receives the job. [When this is set to 1 (jobs are discarded)] Jobs are discarded when the RISOGRAPH cannot receive the jobs. This prevents the print image from being partially missed even when the RISOGRAPH cannot receive jobs for a long time and the sent job times out on the PC. |
Setting value: 0: Spool jobs <default> 1: Discard jobs |
| 0190 | High Speed Button on Display |
Specifies whether to display the high speed button. | Setting value: 0: Not display 1: Display <default> |
| 0191 | Original Undetected Warning Display Ctl. |
Specifies whether to display a warning indicating that no original is detected. | Setting value: 0: Not display <default> 1: Display |
| 0199 | Software Option Enable Control | Allows users to enter the software editor release code (8-digit number) and press the Start key to enable the software editor. | Setting range: 00000000 to 99999999 Unit: 1 Default: 00000000 |
| 0200 | Image Scanner ADF Shading Sensor |
Light blocked - ON (The carriage is in the home position) Light not blocked - OFF |
- |
| 0202 | Flat Bed Original Size Sensor 1 |
Light received ON (Original is present), Light received OFF (Original is not present) | - |
| 0203 | Flat Bed Original Size Sensor 2 |
Light received ON (Original is present), Light received OFF (Original is not present) | - |
| 0209 | Angle Sensor 3 | The original cover is closed | - |
| 0260 | Scanner Lamp | Switches ON/OFF the scanner lamp for original scanning. | - |
| 0281 | Scanner Home Action | Brings the carriage to the home position. | - |