Riso SF9390

Test Mode. List of Test Modes 0001 - 0084

No.	Name	Description	Setting
0001	Wakeup Key Check	ON: The key is pressed	-
0002	Mechanical Counter Connection Signal	ON: The mechanical counter is connected.	-
0003	24V A output signal	ON: 24V-A is ON (24 volts output).	-
0004	24V B output signal	ON: 24V-B is ON (24 volts output).	-
0005	Back Cover Interlock SW	Switch ON (The rear cover of the main unit is attached) Switch OFF (The rear cover is removed)	-
0062	Wakeup LED ON	LED illuminates	-
0080	Test Print A (Checkered)	Creates Test pattern 1 (Checkered). The size of the checkered pattern is 128 dots (10.8mm) x 128 dots (5.4mm). For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).	-
0080	Test Print A (Checkered)	Creates Test pattern 1 (Checkered). The size of the checkered pattern is 128 dots (5.4mm) x 128 dots (5.4mm). For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).	-
0081	Test Print B (Crossed Lines)	Creates Test pattern 2 (Crossed Lines). The size of the crossed line pattern is 128 dots (10.8mm) * 128 dots (5.4mm), where the width of a line is 1 dot (0.084mm) * 1dot (0.042mm). For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).	-
0081	Test Print B (Crossed Lines)	Creates Test pattern 2 (Crossed Lines). The size of the crossed line pattern is 128 dots (5.4mm) * 128 dots (5.4mm), where the width of a line is 1 dot (0.042mm) * 1dot (0.042mm). For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).	-
0082	Test Print C (Dot1)	Creates Test pattern 4 (Dot 1). The dot pattern where the size of a black dot is 8 dots (0.68mm) * 8 dots (0.34mm) For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).	-
0082	Test Print C (Dot1)	Creates Test pattern 4 (Dot 1). The dot pattern where the size of a black dot is 8 dots (0.34mm) * 8 dots (0.34mm) For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).	-
0083	Test Print D (Dot2)	Creates Test pattern 5 (Dot 2). The dot pattern where the size of a black dot is 16 dots (1.35mm) * 16dots (0.68mm) For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).	-
0083	Test Print D (Dot2)	Creates Test pattern 5 (Dot 2). The dot pattern where the size of a black dot is 16 dots (0.68mm) * 16dots (0.68mm) For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).	-
0084	Test Print E (Dotl+Crossed Lines)	Creates Test pattern 6 (Dot 1 + Crossed Lines). The size of the crossed line pattern is 128 dots (10.8mm) * 128 dots (5.4mm), where the width of a line is 1 dot (0.084mm) * 1 dot (0.042mm). The dot pattern where the size of a black dot is 8 dots (0.68mm) * 8 dots (0.34mm) For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).	-

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home

Email:
Password:

New Register	Forgot Password?