Riso SF5330
Test Mode. List of Test Modes 0161 - 0181
Unit | No. | Name | Description | Setting | Model | ||
---|---|---|---|---|---|---|---|
SF9 | SF5*5 | SF5*3 | |||||
Sys / Panel |
0161 | Program Print Repeat Setting | Specifies whether to retain the Single Page Mode setting when the Auto Process function is OFF. |
Setting value 0: Do not retain <default> 1: Retain |
о | о | о |
Sys / Panel |
0162 | M-M Standby Period Setting |
When the Master Making mode is selected, the master making standby conditions (TPH pressure, clamp opening position, and scanner lamp ON) are kept for the period of time specified here. If this is set to 60 seconds or less, the THP, clamp, and scanner standby conditions are cancelled when the specified period of time elapses. If this is set to a value greater than 60 seconds, the scanner standby condition is cancelled when 60 seconds elapse and the TFIP and clamp standby conditions are cancelled when the specified period of time elapses. |
Setting value: 0 to 180 (0s (= No standby) to 180s) Default: 180 (180s) Unit: 1 (1s) |
о | о | о |
Sys / Panel |
0165 | RLP Mode Switch Timing Control |
Sets the display change timing for cases where the RLP auto-selection mode is used. |
Setting range: -5 to +5 (0s to 2.5s) Unit: 1 (0.25s) Default: 0 (1,25s) |
о | × | × |
Sys/ Panel |
0166 | Max. Print Quantity Control | Enables/Disables the maximum print quantity setting, and also sets the maximum print quantity. | Setting range: 0 to 9999 prints (The entered value must be 0 to 9999.) Unit: 1 (1 print) Default: 0 (0 print: The maximum print quantity setting is disabled.) |
о | × | × |
Sys/ Panel |
0167 | Paper ID Auto-Repeat Control |
Specifies whether to reset the paper size settings to the default or keep the current settings when the power is turned off or the all-reset operation is performed. | Setting: 0: Keep the current paper size settings <default> 1: Reset the paper size settings to the default |
о | × | × |
Sys/ Panel |
0169 | "Properties" Display Control |
Specifies whether to display the Properties tab. | Setting value: 0: Not display 1: Display <default> |
о | × | × |
Sys/ Panel |
0170 | Consumable Storage Indication |
Specifies whether to display the Stock Management item on the Properties tab. | Setting value: 0: Not display «default for overseas> 1: Display «default for Japan> |
о | о | о |
Sys / Panel |
0171 | Clock Setting (YEAR) | Sets the year part of the date in the RTC. * When this test starts, the year of the current RTC date appears on the seven-segment display. For example, "2002" appears for the year of 2002. * Test Mode No.0101 (Clock Adjustment Confirm) must be run after values are set in Test Modes No.0171 - No.0173. Test Mode No.0101 applies values set in Test Modes No.0171 -No.0173to the RTC. |
Setting range: 2000 to 2199 Unit: 1 (year) Default: 2000 when the RTC has not yet been set (before No.0101 runs) The RTC value at the start of the test when the RTC has already been set (after No.0101 runs) |
о | о | о |
Sys / Panel |
0172 | Clock Setting (MONTH & DATE) | Sets the month and day parts of the date in the RTC. * When this test starts, the month and day of the current RTC date appear on the seven-segment display. For example, "1001" appears for October 1st. * Test Mode No.0101 (Clock Adjustment Confirm) must be run after values are set in Test Modes No.0171 - No.0173. Test Mode No.0101 applies values set in Test Modes No.0171 - No.0173 to the RTC. |
Setting range: First two digits: 1 to 12 (January to December) Last two digits: 1 to 31 (1 st to 31 st) Unit: 1 Default: 0101 when the RTC has not yet been set (before No.0101 runs) The RTC value at the start of the test when the RTC has already been set (after No.0101 runs) |
о | о | о |
Sys / Panel |
0173 | Clock Setting (HOUR & MINUTE) | Sets the hour and minute parts of the date in the RTC. * When this test starts, the hour and minute of the current RTC date appear on the seven-segment display. For example, "1845" appears for 18:45. * Test Mode No.0101 (Clock Adjustment Confirm) must be run after values are set in Test Modes No.0171 - No.0173. Test Mode No.0101 applies values set in Test Modes No.0171 - No.0173 to the RTC. |
Setting range: First two digits: 0 to 23 (hour) Last two digits: 0 to 59 (minute) Unit: 1 Default: 0000 when the RTC has not yet been set (before No.0101 runs) The RTC value at the start of the test when the RTC has already been set (after No.0101 runs) |
о | о | о |
Sys/ Panel |
0181 | Service Info. File Mail Control |
Enables/Disables the maintenance information to be sent via email. [Sending maintenance information via email] The Maintenance Information email button appears in Functions when this test mode is set to be enabled. |
Setting value: 0: Disabled <default> 1: Enabled |
о | × | × |