Riso SF5130
Test Mode. List of Test Modes 0088 - 0116
Unit | No. | Name | Description | Setting | Model | ||
---|---|---|---|---|---|---|---|
SF9 | SF5*5 | SF5*3 | |||||
Sys / Panel |
0088 | Low-speed Printing Operation | Performs the continuous printing action at 15rpm.
|
- | о | о | о |
Sys / Panel |
0090 | Firmware Program Download |
When the Start key is pressed, the machine firmware program is downloaded into the printer. | - | о | о | о |
Sys / Panel |
0094 | Unit Initialization | Performs the mechanical initialization. (scanner, TPH, master compression plate, clamp unit, vertical print position, and printing pressure) |
- | о | о | о |
Sys / Panel |
0095 | System Configuration Data Output | Creates a master for the Cl system data and makes a print. | - | о | о | о |
Sys / Panel |
0097 | System Parameter, Error Record Print |
Creates a master of the list of data setting changes and error history and makes a print. | - | о | о | о |
Sys / Panel |
0101 | Clock Adjustment Confirm | Applies the time set in Test Modes No.0171 - No.0173 to the RTC and starts the clock. This test runs when the Start key is pressed and ends automatically after 0.5 second. * This test must be run after values are set in Test Modes No.0171 - No.0173. This test applies values set in Test Modes No.0171 - No.0173 to the RTC. |
- | о | о | о |
Sys / Panel |
0103 | System-parameter adjustment store | Stores information from the flash memory on MAIN-SYSTEM-PCB to the USB memory. |
- | о | о | о |
Sys / Panel |
0104 | Drum-parameter adjustment store | Stores the test mode settings from the EEPROM on the print drum PCB to the USB memory. * This test cannot be run when the style differs between the model and the print drum PCB. | - | о | о | о |
Sys / Panel |
0105 | System-parameter adjustment restore | Writes data stored in No.0103 (System-parameter adjustment upload) into the flash memory on MAIN-SYSTEM-PCB. * The power must be turned off and then on after this test mode is run. |
- | о | о | о |
Sys / Panel |
0106 | Drum-parameter adjustment restore | Writes data stored in No.0104 (Drum-parameter adjustment upload) into the EEPROM on the print drum PCB. * This test cannot be run when the style differs between the model and the print drum PCB and the style of the stored data differs from that of the main unit. |
- | о | о | о |
Sys / Panel |
0107 | Test-mode parameter record |
Stores test mode settings and their test numbers into the USB memory if their settings are changed from the default settings. | - | о | о | о |
Sys / Panel |
0110 | Clear Error Status Data | Basically, to clear a jam error status, the jam release procedure should be performed to remove the cause of the jam. However, this test mode can clear a jam error status forcibly, although consumable errors cannot be cleared. | - | о | о | о |
Sys / Panel |
0111 | Clear User Memory | Clears existing data (or resets it to the default) in the user area. The user area, in which users are allowed to edit data, stores memory functions, programs, properties, user mode settings, and other data. Note that the authentication settings are cleared with No.118, rather than this test. | - | о | о | о |
Sys / Panel |
0112 | Clear Test Mode Data Setup (Machine) |
Resets all of the test mode settings stored in the machine memory to the default settings.
|
- | о | о | о |
Sys / Panel |
0113 | Maintenance-Master Count Clear |
Resets the maintenance master counter that triggers maintenance calls. * When this counter is reset, the maintenance calls (for master making) will no longer appear. |
- | о | о | о |
Sys / Panel |
0114 | Maintenance-Copy Count Clear |
Resets the maintenance printing counter that triggers maintenance calls. * When this counter is reset, the maintenance calls (for printing) will no longer appear. |
- | о | о | о |
Sys / Panel |
0115 | Maintenance-Drum Meter Clear |
Resets the maintenance-drum meter that triggers maintenance calls. * When this meter is reset, the maintenance calls (for print drum) will no longer appear. |
- | о | о | о |
Sys / Panel |
0116 | Set-up Wizard Initialize | Initializes the user category, basic screen settings, and mode-change method selection (No need to set the clock again). | - | о | × | × |