Riso MZ1070
Replacement. Acquiring Motor Parameters
Acquiring the Main Motor Parameters
Caution:
Always acquire the main motor parameters after replacing the Mechanical control PCB or the Main motor.
- Set the first and second print drums in the machine.
- Activate Test Mode No. 9874 to access into the protect area Test Mode, and run Test Mode No. 1105 (Main Motor Parameter Acquisition Mode).
- The print drums will begin rotating and obtain the parameters automatically.
- Check the panel display to confirm that the process is completed.
Acquiring the Second Paper Feed Motor Parameters
Caution:
Always acquire the Second paper feed motor parameters each time the Mechanical control PCB or the Second paper feed motor is replaced.
- Activate test mode No. 9874 to access into the protected area test mode.
- Run Test Mode No. 1106 (Second Paper Feed Motor Parameter Acquisition Mode).
- The guide roller moves to the nipping position against the timing roller, and the second paper feed motor begins to rotate and obtains the parameters automatically.
- Check the panel display to confirm that the process is complete.