-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Riso HC5500
Troubleshooting. Error indication by LEDs
Outline diagram
- When an error is generated, numbered LEDs in the diagram light to indicate the location of the error generated. This LED lighting condition provides the following information.
- The color of the LEDs is red.
LED No. |
Description |
LED No. |
Description |
1 |
Paper feed error |
11 |
K ink error |
2 |
Paper transfer error |
12 |
C ink error |
3 |
Exit error |
13 |
M ink error |
4 |
Duplex entry error |
14 |
Y ink error |
5 |
Duplex transfer error |
15 |
Ink set cover error |
6 |
Duplex switchback entry error |
16 |
Waste ink tank error |
7 |
Duplex switchback error |
17 |
Feed tray 1 error |
8 |
Duplex re-feed error |
18 |
Feed tray 2 error |
9 |
Main unit right cover error |
19 |
Base left cover error |
10 |
Main unit left cover error |
20 |
Vertical path upper section error |
|
|
21 |
Option error |
Consumable information
- The LEDs in this area indicate the remaining volumes of ink and paper.
- When the levels of K, C, M, and Y inks run low, the corresponding ink color LEDs (orange) lights up.
- When the remaining paper volume in the standard paper feed tray or the feed tray falls to very low levels, the corresponding LED (orange) lights up.
- When all the set inks are in correct operating condition, the [i-fit] LED (green) lights up.
Error types
When an error is generated, the LED (red) corresponding to the type of the generated error lights up.
Name of LED |
Description |
Ink change |
This LED lights up when ink cartridges or the waste ink tank need to be replaced. |
Setting check |
This LED lights up when a cover is out of position. |
Service call |
This LED lights up to indicate a service error. |
Paper jam |
This LED lights up to indicate a paper jam. |
Maintenance call |
This LED lights up when a scheduled maintenance call interval is approaching or the waste ink tank is reaching full capacity. |