Riso GR3770
Test Mode. 6. SEQUENTIAL OPERATION TEST 2
No. | Details of Test Mode |
---|---|
112 | Cutter motor one-cut operation |
113 | FB type ADF original feed operation (Image scanner does not operate.) ADF original det. sensor ON ⇒ ADF original setting ⇒ ADF read-in operation ⇒ ADF original det. sensor ON ⇒ ADF original setting ... |
114 | Pressure changing operation (This applies only to 300/400dpi types.) Set to initial level ⇒ one second halt ⇒ shifted to Level 23 ⇒ shifted to Level 1 ⇒ set to initial level ⇒ ´ 3 times ⇒ stop |
115 | Ink thermistor AD value display |
116 | TPH thermistor AD value display |
117 | Thermal print head check operation 1 Makes a master of Test Pattern 1 memorized inside the image processing PCB. |
118 | Thermal print head check operation 2 Makes a master of Test Pattern 2 memorized inside the image processing PCB. |
119 | Thermal print head check operation 3 (checkered) Makes a master of Test Pattern 3 memorized inside the image processing PCB. |
120 | Thermal print head check operation 4 (checkered) Makes a master of Test Pattern 4 memorized inside the image processing PCB. |
121 | Original Scanning density default setting (Memory SW) (Initial setting of original Scanning density on starting) Memory SW 0 1 2 3 Default Auto Manual 3 Manual 4 Power OFF state |
122 | Setting of sheet no. return on Master Making mode switching (Memory SW) (Sets sheet no. return when mode has been switched to Master Making while in printing.) Memory SW 0 1 Details Sheet no. return Sheet no. not returned |
131 | Suction clutch operation Main motor rotates at 15rpm. Every pushing of <*> key turns ON/OFF the suction clutch. |
132 | Image Scanner Fix mode (Set) (This applies only to 600dpi type.) Prior to delivery, the image Scanner is shifted to the fixed position where its operation is stopped. |
133 | Image Scanner Release mode (Reset) (This applies only to 600dpi type.) On unpacking, image Scanner fixing parts are removed and Test mode is executed. Image Scanner Fix mode is cancelled and the image Scanner is shifted to the home position. |
135 | Clamp Unit Initial Operation (This applies only to 600dpi type.) |
136 | Clamp plate opening operation (This applies only to 600dpi type.) Clamp plate is opened when the 0° angular sensor is ON. |
137 | Clamp plate closing operation (This applies only to 600dpi type.) Clamp plate is closed when the 180° angular sensor is ON. |
139 | Sorter Initial Communication mode (This applies only to 600dpi type.) Following connecting to the sorter, perform initial communication with the sorter to enable its use. |