Riso GR3770
Test Mode. 6. SEQUENTIAL OPERATION TEST 1
No. | Details of Test Mode |
---|---|
101 | Ink supply operation |
102 | Elevator operation Operation starts when the feed tray DOWN button is pressed. UP ⇒ Elevator upper limit sensor ON ⇒ stop Upper limit position ⇒ DOWN ⇒ elevator lower limit sensor ON ⇒ stop Operation stops when the feed tray DOWN button is released. |
103 | Print positioning motor operation (one-cycle) (This applies only to 300/400dpi types.) Return to Vertical center position ⇒ one second halt ⇒ downward rotation ⇒ one second halt ⇒ upward rotation ⇒ one second halt ⇒ return to vertical center ⇒ stop |
104 | Clamp open/close continuous operation Rotate Drum to Home position ⇒ clamp plate opened ⇒ one second halt ⇒ clamp plate closed ⇒ Rotate Drum to Home position ⇒ clamp plate opened |
105 | ADF Original feed operation ADF original det. sensor turned ON ⇒ original setting operation ⇒ read-in operation ⇒ ADF original det. sensor turned ON ⇒ original setting operation ... |
105 | Image Observation mode (factory use) (This applies only to 600dpi.) |
106 | Confidential 3-cycle operation (This applies only to 300/400dpi types) Confidential op. ⇒ press op. ⇒ drum rotated by 5 times ⇒ confidential op. ⇒ ......⇒ stop |
107 | Printing continuous operation (This applies only to 300/400dpi types.) Neither copy counting nor paper jam detection is performed. Speed changing, feed tray lowering for paper shortage, inking operation, and pressure changing are performed. |
107 | Ink-free printing operation (This applies only to 600dpi type.) Continuous printing is performed without inking. |
108 | Flat bed read pulse motor (image sensor) continuous operation (speed at 100%) Image Scanner home position sensor position (2 seconds halt) ⇒ rightward shift ⇒ ADF shading sensor position (2 sec. halt) ⇒ rightward shift ⇒ ADF read-in position (2 sec. halt) ⇒ leftward shift ⇒ Image Scanner home position sensor position (2 sec. halt) ⇒ rightward shift ⇒ ..... |
109 | Machine aging operation Drum rotation at 3000 times ⇒ Stop at A detection |
110 | Elevator aging operation (This applies only to 300/400 dpi types.) UP ⇒ elevator upper limit sensor ON ⇒ stop ⇒ DOWN ⇒ elevator lower limit sensor ON ⇒ stop ⇒ UP ⇒ ´5000 ⇒ stop |
111 | Thermal pressure motor operation When TPH home position SW is ON: DOWN ⇒ TPH pressure SW ON ⇒ stop When TPH pressure SW is ON: UP ⇒ TPH home position SW ON ⇒ stop |