Riso GR3710
Test Mode. 4. Sequential Operation Test 2
No. | Test Item |
---|---|
108 | Flat bed read pulse motor (scanner) movement (Press START button again to stop) Image scanner home position sensor (2 sec. halt) m Image scanner shading sensor (2 sec. halt) m FB-ADF scanning position (2 sec. halt) m Image scanner home position sensor (2 sec. halt) • • • (This is repeated until START button is pressed.) (5900 only) |
109 | Machine aging operation 130 rpm Drum rotation m 3000 times Magnet A detection m Stop. |
110 | Elevator aging operation UP m Upper limit sensor ON m Stop m DOWN m Lower limit sensor ON m Stop m UP (This cycle is repeated for 5000 times) m Stop. |
111 | Thermal pressure motor If the TPH home position switch is pressed:
|
112 | Cutter motor ON [One-cut operation] |
113 | FB-ADF Original feed operation (Press START button again to stop) Pick-up one original m Feed original m Eject original m Original detection sensor ON m Pick-up one original (Repeats this cycle until START button is pressed.) (5900 only) |
114 | Pressure control motor Center position m One second halt m Rotates to pressure setting No.12 m Rotates to pressure setting No.1 m Returns to center position (This cycle is repeated three times) m Stop. |
115 | Ink Thermistor check Ink thermistor is defective if "00" or "FF" is shown on the display. All other numbers indicate the thermistor is in good condition. * Displayed number is not the temperature. |
116 | TPH Thermistor check TPH thermistor is defective if "00" or "FF" is shown on the display. All other numbers indicate the thermistor is in good condition. * Displayed number is not temperature. |
117 | Thermal print head check operation 1 Makes a master of test pattern #1 memorized in the Image processing PCB. |
118 | Thermal print head check operation 2 Makes a master of test pattern #2 memorized in the Image processing PCB. |
119 | Thermal print head check operation 3 Makes a master of test pattern #3 memorized in the Image processing PCB. (4900 & 5900 only) |
120 | Thermal print head check operation 4 Makes a master of test pattern #4 memorized in the Image processing PCB. (4900 & 5900 only) |