Riso ComColor 3150
Error Code Display. 2. Error Types
Error types are a combination of a class code and subdivision code. Class codes are a single letter indicating the type of error: S, U, Z, X, Y, W, or I. Severity of errors ranges from "S" (most critical) to "I" (least critical), with some exceptions. Subdivision codes are two-digit numbers in the range 01–99 that further classify errors.
S | Service Call Errors |
---|---|
Details | A problem affecting the system as a whole has been detected, for which the fundamental solution cannot be implemented by users alone. (Problems in independent units, which do not affect the system as a whole, for which fundamental solutions are not possible are classified as service call errors.) |
Solution | Turn the printer OFF or follow instructions on the operation panel to clear the problem. However, a permanent solution will require repair by a service technician. |
Notification | Users are notified immediately, in all operating modes. |
Operation | No operating modes can be accessed until the error is cleared except test modes, which are accessible even during service call errors. |
Resuming Jobs |
It is not possible to resume jobs interrupted by the error. |
Other | Mechanical operations are promptly stopped when these errors occur, to avoid causing other damage. |
U | Unit Errors |
---|---|
Details | A problem affecting the system as a whole has been detected, for which the fundamental solution cannot be implemented by users alone. (Problems in independent units, which do not affect the system as a whole, for which fundamental solutions are not possible are classified as unit errors.) |
Solution | Turn the printer OFF or follow instructions on the operation panel to clear the problem. However, a permanent solution will require repair by a service technician. |
Notification | Users are notified immediately, in all operating modes. |
Operation | No operating modes can be accessed until the error is cleared except test modes, which are accessible even during unit errors. |
Resuming Jobs |
It is not possible to resume jobs interrupted by the error. |
Other | Mechanical operations are promptly stopped when these errors occur, to avoid causing other damage. |
Z | Loading/Interlock Detection Error |
---|---|
Details | A problem has been detected by the interlock system, or a cover has been opened that does not interfere with operation. |
Solution | Users resolve these errors by restoring the interlock system to normal status or by closing the cover that does not interfere with operation. |
Notification | Users are only notified in modes where there is a possibility that the relevant unit may be used. If users switch to a mode in which the unit is not used, notification is canceled. Note that even in modes where the unit is not used, error status can be checked by referring to error LEDs. |
Operation | Only operating modes that do not use the unit can be accessed until the error is cleared. |
Resuming Jobs |
It is possible to resume jobs interrupted by the error. |
Other | Mechanical operations are promptly stopped when these errors occur, to avoid causing other age. |
X | Jam Errors |
---|---|
Details | A problem has occurred that prevents normal paper transfer. |
Solution | Users resolve these errors. |
Notification | Users are only notified in modes where there is a possibility that the relevant unit may be used. If users switch to a mode in which the unit is not used, notification is canceled. Note that even in modes where the unit is not used, error status can be checked by referring to error LEDs. |
Operation | Only operating modes that do not use the unit can be accessed until the error is cleared. |
Resuming Jobs |
It is possible to resume jobs interrupted by the error. |
Other | Mechanical operations are promptly stopped when these errors occur, to avoid causing other damage. |
Y | Supply Errors |
---|---|
Details | Consumables must be replaced or waste material must be removed. |
Resuming Jobs |
It is possible to resume jobs interrupted by the error. |
Other | After the condition of the error occurs, normal operation is continued to the extent possible until a convenient time to stop processing. |
W | Warnings |
---|---|
Details | A problem has occurred that users must be warned about. |
Solution | Users respond to warnings, which can be cleared by users through panel operations. |
Notification | Users are only notified in modes where there is a possibility that the relevant unit may be used. If users switch to a mode in which the unit is not used, notification is canceled. Note that even in modes where the unit is not used, warning status can be checked by referring to error LEDs. |
Operation | After the condition of the warning occurs, normal operation is continued to the extent possible until a convenient time to stop processing. |
Resuming Jobs |
It is possible to resume jobs interrupted by the warning. (However, some warnings prevent jobs from being resumed.) |
I | Information |
---|---|
Details | A situation has occurred that users must be informed about, such as the time for regular part replacement. |
Solution | Users respond to the tip, which can be cleared by users through panel operations. However, a permanent solution will require service by a service technician. |
Notification | Users are only notified in modes where there is a possibility that the relevant unit may be used. If users switch to a mode in which the unit is not used, notification is canceled. Note that even in modes where the unit is not used, information status can be checked by referring to error LEDs. |
Operation | Conditions for information messages do not affect current processing. |