Ricoh SPC840DN
Maintenance. 3. Preparation Before Operation Check
- Enter the "User Tools" mode.
- Do the "Color Calibration". For details about Color Calibration procedure, refer to Color Registration and Color Calibration
- Exit the "User Tools" mode, and then enter the SP mode.
- Perform the line adjustment. SP2-111-004: Forced Line Position Adj. Mode d The result can be checked with SP2-194-007 (MUSIC Execution Result Execution Result) (0: Success, 1: Failure). Also, results for each color can be checked with SP2-194-010 to 013.
- Exit the SP mode.
SP Descriptions
- SP2-194-007 (MUSIC Execution Result: Execution Result)
Displays the result code of MUSIC adjustment.
0: Success
1: Failure - SP2-194-010 to 013 (MUSIC Execution Result: Error Result C,M, Y, K)
Displays the result code of MUSIC adjustment for each color.
0: Not done
1: Completed successfully
2: Cannot detect patterns
3: Fewer lines on the pattern than the target
4: Out of the adjustment range
5 to 9: Not used
Operation Check
Check if the sample image has been printed normally.