Ricoh SPC435DN
Troubleshooting. UNFUSED OR PARTIALLY FUSED PRINTS, IMAGE SKEW
UNFUSED OR PARTIALLY FUSED PRINTS
| Symptom | Possible cause | Necessary actions |
|---|---|---|
| Some parts of images are not fused very well. | Non-standard paper in use | Use recommended paper. |
| Incorrect media type mode | Select an appropriate media mode. | |
| Defective fusing unit | Replace the fusing unit. |
IMAGE SKEW
| Symptom | Possible cause | Necessary actions |
|---|---|---|
| Images are skewed | Incorrect installation of paper | Install the paper correctly. |
| Incorrect paper guide position | Adjust the paper guide correctly. • When adjusting the paper width, use the right side guide only, with the green clip. Do not hold • the left side guide at this time, or skew will occur. |
|
| Defective registration roller | Repair the paper feed unit. | |
| Incorrect action of paper transfer roller | Check the paper transfer roller. | |
| Defective BCU | Replace the BCU. | |
| Incorrect installation of paper tray | Uninstall the paper tray units and re-install them. |