Ricoh SP4510SF
Troubleshooting. Test Pattern Printing
Follow the test pattern print procedure below to print a test pattern.
Note:
• Do not operate the machine until the test pattern has been printed. Otherwise, an SC occurs.
- Enter the SP mode, and then select SP2-109-001.
- Select the pattern number, and then press [OK].
- Display the Copy function by pressing [Start] key, and then specify the scanning conditions for test pattern print.
- Press [Start] key to print the test pattern.
- Check the test pattern, and then go back to SP mode.
No. | Pattern |
---|---|
0 | None |
1 | Vert. (1 dot) |
2 | Hori. (1 dot) |
3 | Vert. (2 dot) |
4 | Hori. (2 dot) |
5 | Grid Vert. |
6 | Grid Hori. |
7 | Grid 20mm |
8 | Arg. Grid |
9 | Arg. Grid 20mm |
10 | Indep. (1 dot) |
11 | Indep. (2 dot) |
12 | Indep. (4 dot) |
13 | Full |
14 | Band |
15 | Gray 10mm |
16 | Gray 20mm |
17 | Trim Area |